Best Table Saw Fences: Bettering Your Saw Precision

Before we even start our review for the best table saw fences in 2021, I think we need to be on the same page when it comes to knowing what it means.

Yes, I do understand that there are seasoned woodworkers and craftsmen who would like me to get to the point, but this is for all the starters who want to turn their garage into a crafting room.

In essence, it is a straight edge place alongside the saw blade, and it acts like a width regulator. The idea is to simply hold the work-piece against the fence tightly, and then run the saw. The distance between the saw and the fence determines the width of the material cut.

Now that we are on the same page, let’s get on with the reviews and buying guide.

Best Table Saw Fence Comparison Table

ProductFence Bar LengthDetails
PW1113 Table Saw Fence43" Details
PW1112 Table Saw Fence36" Details
Delta BC30T2 Table Saw Fence30" Details
Shop Fox W1720 Table Saw Fence50" Details
Delta 78-919BT2 Table Saw Fence36" Details

Why Do You Need An Aftermarket Table Saw Fence?

Ah yes, the underlying question. It might seem like an accessory to the untrained eye, but it can be the difference between professional woodwork and amateur carving.

This thing is needed for its basic function which is pretty simple; it holds the work-piece in place so you can cut in a straight line. No matter the dexterity you might possess, it is always better to rely on a mechanical system to ensure accuracy. You might especially need it if you are just starting out.

The fence is fixed on the table and parallel to the saw blade, so if you align the work-piece to it, the saw blade will always cut at a constant width. This not only allows for a clean cut but also lets you freely control the width of the material you are cutting.

Benefits of a table saw fence:

  • Prevents the cut from being crooked
  • Firmly secures the work-piece in place
  • Facilitates cutting out materials of consistent width
  • The cutting is very precise
  • Can be used to cut material of a specific width
  • Often includes a scale which boosts accuracy
  • Friendly for beginners

Applications of a table saw fence:

  • Used in wood crafts
  • To cut precise, identical blocks
  • Employed in industrial manufacture
  • In making wooden furniture
  • In developing wooden floors

5 Best Table Saw Fences Reviews In 2021

If you’re on the search for the best table saw fence reviews, look no further. We’ve handpicked five models, which by our trials, are the best of the best. They are detailed as follows;

43″ Uni-t-fence Table Saw Fence by Peachtree Woodworking

46'' Uni-t-fence systemThis model boasts a Biesemeyer style construction or a t-style construction which, to all who are unaware, is a setup that looks like a “T” when viewed sideways. It is a very reliable type of fence as it locks into place on just a single rail. That means no rechecking or readjusting and thus will save you some time there.

When it comes to width capacity, it can go as far as forty-three inches. This is usually enough for most garage woodworkers, if not a little too much. The width is off to the right as usual, and any measurements under forty-three are just as easily cut as well. This almost has twice the rip capacity of typical fences.

If you’re just starting out, you’ll find no gripes with this model as there is no hassle of screws and bolts. You just mount it on the rail. Given you already have a Delta Unifence system, even if you have never touched a bolt in your life, you will still be able to install this fence on the rails.

This is an upgrade rather than a standalone sturdy table saw fence system, it means that you will have to have all the auxiliary equipment beforehand. More specifically, it only works on the Delta Unifence table saw system. However, if you are dexterous enough, you can make some alterations on other models to fit this upgrade.

This heavy-duty fence is an upgrade in the sense that it adds much more versatility to your table saw system. It has shafts and channels to make room for extra tools. You can add jigs or bumps to improve accuracy. You could also add a sacrificial fence in front to better hold the workpiece in place so you can cut with precision.

Highlighted Features

  • T-style fence
  • Forty-three inches rip capacity
  • Simple mount system
  • Channels to incorporate auxiliary tools

36″ Uni-t-fence Fence by Peachtree Woodworking

Delta table saw fence reviewsThis is a smaller upgraded fence from Peachtree Woodworking. And, considering its smaller size and more suitability for the average woodworker, it the best table saw fence for the money. Since it is an upgrade to the Delta Unifence system, you do need the table above saw system beforehand.

Like its forty-three-inch counterpart, the thirty-six-inch uni-t-fence is easily mountable. You do not have to bother with screws and bolts. Some systems require you to drill mounting holes before you can fit the screws in, so that can be very tedious. But with this model, you just slap it on, and it just functions.

As it is built for the Delta Unifence table saw system, it not only fits easy but fixes very rigidly on the standard rails. And you can slide it around with no resistance when you have the positioning knobs unfastened. Being a T-style fence, it needs only one rail, and when it is fixed on, it holds its position parallel to the cutting saw.

For its smaller size, it can be easily fit on a smaller table saw. Its dimensions also mean it is portable, and you can store it away much more easily. So, if you’re just looking to do some occasional woodwork and your old fence isn’t just doing it, this is a relatively cheap upgrade that will easily fit on your old rails.

Carved into the fence are cavities and shafts as well. These allow the mounting extra tools and fixtures. For example, you may want extra support so you can add another wooden fence in front of this fence or, you could add bumps or pegs to maintain the uniformity of the cutting.

Highlighted Features

  • Mounting is simple
  • Thirty-four-inch length
  • Portable
  • Reliable T-style build

Delta Power Equipment Corporation BC30T2

Delta table saw fence for the moneyAgain, this model manufactured by Delta, consists of a T style fence. These days such styles have gotten more popular because of their simple yet effective build. You can usually operate table saw fence with one rail, and they maintain uniformity through the entire length of the fence, so the cutting is very precise.

However, this is not just a fence; it comes with auxiliary rails as well. Therefore, all you need is a table saw. There is an angled iron rail, the front one with which you can set the width of the cut. With T-style fences, you don’t need a rear rail as they are very uniform.

This whole assortment of tools might seem a little troublesome, but don’t worry. Setup is easy; the instructions provided are very concise and clear so that you can have it set up in no time. In fact, you should have a full-fledged, working table saw fence system in just twenty minutes or so.

And when I said that all you need is a saw table, I really did mean any saw table. The setup is made to fit onto any old saw table with ease. You might need to drill in a couple of holes and have to screw in a few bolts, but it’s still very simple to set up. Even traditional wooden table saws are compatible with this.

However, if you are looking to go at it frequently, I do have to caution you. You might need to service it up a little. Otherwise, things might not go as you want them. You might want to grease the rails and get them aligned properly to work.

Overall, although I won’t call it the best table saw fence system out there, it’s certainly worth the money.

Highlighted Features

  • Comes with a rail system
  • Installation is quick
  • Fits on most table saws
  • Comes with a T-style fence

Shop Fox W1720 Aluma-Classic Fence

Shop Fox table saw fenceThis model packs a single side rail and single lock system. Not only does that make understanding its mechanism easy, but the operation itself becomes very easy. You don’t have to lean over and undo and redo the lock on the rear rail, because there is no rear rail at all! It’s just one simple screw.

At fifty-inch rip capacity, this fence approaches the limit of the cutting capacity of a typical table saw fence. This means that it can accommodate many more types of craftwork. You could use this to cut plywood sheets or to make thick wooden pillars for some project or job order.

It can also be installed rather fast. Having a brand-new high-quality table saw fence system, especially for the price, and then only needing a half hour to set it up is an excellent deal for a lot of hobby workers. Even for the novice, it is easy as the instructions are given quite clearly on the manual that is provided.

This is also not just a fence; it also comes with a light-duty aluminum rail that can be fit on most table saws. The front rail and fence assembly can be fixed on in minutes, and the fence runs very smoothly on the rail.

Many fences and rail assemblies need lubrication to run, but this model is well oiled and polished to run flawlessly.

Do be careful that you get both though. People have often confused the fence alone to be the whole assembly. This fence does not work with other rails very smoothly; it was built for the rails it comes with. So, when you’re getting the thing, make sure you have ordered both the fence and rail system.

Highlighted Features

  • The simple one-sided lock system
  • Fast installation
  • Inexpensive
  • Fifty-inch rip capacity

Delta Power Tools 78-919BT2

Biesemeyer table saw fenceIf you’re looking for a cheap replacement drop on the fence because yours just so happened to become faulty, look no further. This one is the answer.

It is compatible with various rails and with the ones that it’s not compatible with, you can still make adjustments – such as; a drill here or a bolt there – to make it work just as good as your previous one, if not better.

As a Biesemeyer style table saw fence, it carries the classic T-shaped design. And it checks all the requirements to be a modern, easily operable fence with a single control lock situated at the front. This means you don’t have to reach out far to screw or unscrew it. And, it maintains its parallel level along the entire fence.

Installing this is also rather easy. It usually takes about a half or something like that to fully bolt it in. The three-pin system that is incorporated into this makes the fastening very secure. It also helps to fix it on your table saw precisely, and it aligns with the table saw very accurately.

And don’t worry about the type of table saw, because this will fit on most of them. It is rather versatile and can be installed on even traditional wooden or domestic table saws.

So, if you just like doing some woodwork on the down low, you might want to consider this. If you’re a professional, even then it’s a quick and inexpensive replacement.

There is one thing to note though, adjusting this has proven to be a very cumbersome task. It is a somewhat unconventional design, so having it just glide over your rails may not yield great results. It just might not work. Try using some sort of lubricant to get things going.

Highlighted Features

  • Biesemeyer style fence
  • Easy installing
  • Versatile, suitable for a wide range of tables

Best Table Saw Fences Buying Guide

In this section, we’ll talk about the features that you need to consider before making the purchase. These features will help you find the right option for you.

Types of Fences

On the market, there are two basic types of fences, and they both have their pros and cons. They are as follows;

T-style Fence

This is the more modern style fence. It consists of a three-point locking system and is very reliable. It is a square type fence, and usually allows room for auxiliary equipment.

You can attach jigs, or pins or other types of fixtures on them as a result. It can also be replaced with upgrades, and its replacement parts are usually available in shops.

Sliding Type Fence

Found in more traditional setups, this type of table saw moves back and forth. It prevents material kickback and lets you cut a wider range of material. It can be laid back and will lower its profile, and you can use that to make cuts on the much thinner material.

So ultimately, it is on you. If you work on typical, run-of-the-mill wood, going with the T-style might be better. On the other hand, you might like the sliding type if you do thinner woodwork.


Now when it comes to size, it is pretty self-explanatory if you’re a professional. Chances are, you’ll be using a wider variety of wood so you might want to opt for something larger.

However, if you’re just a hobbyist, I have to advise against buying a very expensive fence whose features you may not even need.

Easy Installation

Here, the difference comes in how experienced you are. If you are a beginner, I’d ask you to go for something you can actually put together. On the other hand, a seasoned woodworker may not even need to read the instructions to get it working.


While a competent level of accuracy is important for everyone, it matters the most if you’re a professional. You might need tip-top quality work to be done on your material so keep an eye out for that.

Yes, they are pricier, but the trade-off is worth it.

Rip Capacity

It is basically the gap between the blade and the fence. If you think you’ll be cutting wider pieces of wood, get one with higher rip capacity.


This is arguably the most important aspect. Make sure you’re aware of the price. Yes, these are all on the more expensive side, but a little investment can go a long way.

What are the Types of Table Saw Fences?

There are two broad categories of the best replacement table saw fences available on the market.

  1. T-Square table saw fence
  2. Uni-Fence

T-Square fence is one of the most common and popular table saw fence that is recently produced by the well-known table saw brands like HTC, Delta, Vega, and Powermatic. This style fence is in high demand because it allows you to maintain the right squareness and to reach the perfect position with the 3-point locking system. You can easily attach any jigs and fixtures to this square-shaped fencing system. Again, it allows you to easily replace the surface design on both sides of the fence.

The second type of fence is Uni-Fence, generally found on sliding table saws and comes with the table saw manufacturers only. These fences have several features that make them popular to the table saw users. The fence works very smoothly with the help of a miter gauge. It allows you to make perfect cuts and makes the fence slide back and forth with less possibility of occurring kickbacks. These types of fences also can be adjusted to the lower profile thus make you comfortable while cutting thin materials.

How to adjust table saw fence?

To align the table saw fence perfectly is the first precondition to ensure its efficiency and safe operation of the table saw. If the fence in not adjusted flawlessly, it creates great danger, like the common one being occurring kickbacks.

However, the process is simple but also time-consuming. We have here explained the overall process into some steps. All you need to be patient and follow the process accordingly.

  1. First, to ensure your safety, make sure that the table saw in disconnected from the power outlet.
  2. Make the blade and miter slot of the saw aligned and parallel to each other.
  3. Then place the fence on your saw-top. The fence should remain unlocked while adjusting it. Ensure that the fence is also parallel to the miter track and the blade.
  4. Keep the desired distance between the fence and the blade of the saw. To have the correct adjustment and perfect cuts, this measurement needs to be correct. Take the measurements from the edge of the table or from the back of the saw.
  5. After that, place your finger on the sidewall of the miter slot and slide the fence thoroughly until the fence is aligned with the miter slot. Then to ensure that the fence and miter slot are aligned, move your finger at the downside of the miter slot and then back to the edge of the table saw.

Perhaps, sometimes you need to adjust the fence by using set crews. But be sure to use the right screws as different fences may a bit different. You can also use a dial indicator to align any universal table saw fence system in case you feel uncomfortable with your fingers.

Frequently Asked Questions (FAQs)

Can I Use My Table Saw Without A Fence?

The answer is yes. You can use your table saw without any fence system adjusted to it. But when you consider the accuracy of your cutting, you need the best value table saw fence. It will make your job easier, specially when it comes to lining up and measuring your cuts. The fence also helps you to accommodate longer pieces of materials. The fence for table saw reduce the possibility of occurring kickbacks during the cutting process.

Undoubtedly, a versatile table saw fence ends with precision cutting thus makes your work more effective and safe.

What size of table saw fence do I need?

Table saw fences include different dimensions and generally come with no extendable feature. You are usually stuck with whatsoever size you buy. So it is very crucial to know what size you are buying according to your work. In most common cases, if you work on large projects then you may go for a 50-inch fence. If you have small projects in hand, 30-inch may be more than necessary.

The size differs depending on your work requirements. However, you can extend your upgraded table saw fence by using extra wooden plank that some DIYers do.

Are table saw fences universal?

No. Table saw fences are not universal to use. In some cases, if you have any biesemeyer table saw fence then that may be universal to use because those are sometimes interchangeable. Usually, table saw fence fit on the front of the table saw with a small clamp. So, if the sliding part doesn’t fit the table, it won’t be either square or safe.

What side of the table saw should the fence be on?

It may be confusing for the beginners that where the fence should be on the table saw; on the right side or on the left side. Although there are left or right specifically tilting blade, in general, the fence should be on the side of the table-top hence side of the blade that you are handed. So, if you are left-handed the fence should be on the left of the blade and if you are right-handed the fence should be on the right.

You may adjust the fence on either side of the blade because of the most contractor and hybrid table saws work fine whether the fence is on left or right. The important thing is that you must go with your dominant hand for the ripping process.


I can’t exactly deliver a verdict, because your ideal option can differ from mine to choose the highest-ranked table saw fence. But keep in mind that your right choice will give you a perfect table saw for your work.

Nevertheless, I hope that our best budget table saw fence reviews have been of some help to you. If this post has helped you to get the most sought-after table saw fence on the market, then I’ll consider my efforts successful. And please let me know in the comments section which one you have decided to go with.

%d bloggers like this: