You can get a 380 magazine speed loader built for your exact pistol. If you own a Smith & Wesson M&P Bodyguard 2.0 .380, Magazine Speed Loader for Bodyguard 2.0 is the first pick. The maker says it is tailored for this magazine, so it is built to fit that one model rather than any 380.
It is the only one of the three made for that model. The other two, the Hilljak Quickie Loader and the SIEGMANNS Two-Pack, are built for the M&P 380 Shield EZ. If you carry a Shield EZ, skip the first pick and look at those two instead.
Fit is the main limit to check before you buy. The first pick does not fit the original single stack M&P Bodyguard 380, and some buyers of the Hilljak loader report that it does not always fit the magazine perfectly.
As an Amazon Associate we earn from qualifying purchases.
How we picked: from products sold on Amazon for this need, compared by what their makers state and what buyers report in their reviews.
The Picks at a Glance
Product | Best for | Dimensions | Color | Buyer rating | |
|---|---|---|---|---|---|
Bodyguard 2.0 Speed Loader | Bodyguard 2.0 owners | 2.25″L x 1.3″W x 2″H | Olive Green | 4.5 of 5 (646 reviews) | |
Hilljak Quickie Loader | Shield EZ owners who want US-made parts | 4 x 2.6 x 0.75 in | Orange | 4.6 of 5 (455 reviews) | |
SIEGMANNS Two-Pack | Shield EZ owners who load often | — | Black | 4.2 of 5 (3 reviews) |
Buyer ratings as shown on Amazon on October 13, 2026; they change.
Bodyguard 2.0 Speed Loader: Best for Bodyguard 2.0 owners
Magazine Speed Loader for Smith & Wesson M&P Bodyguard 2.0 .380 is the first pick if you own a Bodyguard 2.0 .380. It is built for that one magazine, and its stated fit and loading design make it an easy choice for that pistol.
The maker says the loader is tailored to this magazine and guarantees a perfect fit, so it is designed for the Bodyguard 2.0 .380 specifically rather than as a generic accessory. For you, that means you can press it onto the magazine opening without guessing whether it will sit right, which is the main reason to choose a model-specific loader.
The maker also says one hand can hold the magazine while the other inserts rounds, and that large side flanges give an easy grip. In daily use, that lets you load a full magazine at the bench or on a table by pushing each round down, instead of squeezing the spring with your thumb every time. The maker adds that the design is meant to spare your thumbs from strain.
Pros
Designed for the Bodyguard 2.0 .380 magazine, with a stated fit tailored to it.
Lets one hand hold the magazine while the other loads.
Buyers say it loads the full 12 rounds easily.
Buyers say it lasts through many loadings without wearing out.
Cons
Buyers say it is too narrow for some pistol magazines, so the fit can be poor.
The maker says it does not fit the original single stack M&P Bodyguard 380.
If you own a Shield EZ, skip this one and look at the Hilljak Quickie Loader or the SIEGMANNS Two-Pack, which are built for that model.
Hilljak Quickie Loader: Best for Shield EZ owners who want US-made parts
The Hilljak Quickie Loader is the pick for Shield EZ owners who want a loader made in the USA. It is built only for Smith & Wesson M&P 380 Shield EZ magazines, and the maker says it is made in the USA from durable 3D printed polymer plastic.
The maker says its ergonomic design saves your fingers from the pain of loading and helps you load quicker. If loading a full magazine leaves your fingertips sore, this shape is meant to take that pressure off, so each reload is less of a chore at the range. For a closer look, read Best Long Range Calibers and the Tools for Logging Your Shots.
The loader is also sized for compact use. Its package measures 4 x 2.6 x 0.75 inches and it weighs 0.02 kg, so it is small enough to keep in a range bag or pocket.
Pros
Made in the USA from 3D printed polymer plastic
Ergonomic shape that helps spare sore fingers during loading
Buyers say it makes loading magazines easy and works well
Buyers say the finger safety features help people with arthritis
Cons
It fits only Shield EZ magazines, so it will not help with other 380 models
Buyers say it does not always fit the magazine perfectly
If you own a Bodyguard 2.0, look at Magazine Speed Loader for Smith & Wesson M&P Bodyguard 2.0 .380, the first pick, which is built for that model.
SIEGMANNS Two-Pack: Best for Shield EZ owners who load often
Magazine Speed Loader Compatible with Smith & Wesson M&P 380 Shield EZ is the pick for Shield EZ owners who load magazines often. It comes as a two-pack, and its thumb saver design is meant to cut down on hand strain.
The set includes two loaders, so you can keep one at the range and one at home. The maker says the extra can go in a separate gear setup, be shared with another shooter, or serve as a backup. If you load a full box of magazines in one sitting, a spare in your range bag saves you from digging through a second case.
The maker says the thumb saver design reduces thumb pressure and hand fatigue during extended loading sessions. For a shooter who fills several magazines at once, that means less strain on the thumb. The loader is also described as helping reduce the effort needed to load rounds, which matters most when the magazine spring is stiff.
Pros
Two loaders in one set, so a spare is always on hand.
The thumb saver design eases long loading sessions.
Designed to reduce the effort of loading rounds against stiff springs.
Cons
Made only for M&P 380 Shield EZ magazines, so other 380 pistols need a different loader.
If you own a Bodyguard 2.0 .380, the first pick Magazine Speed Loader for Smith & Wesson M&P Bodyguard 2.0 .380 is the better match.
How do you choose the right loader for your 380?
Start with your pistol’s model name, since each loader fits one model. If you own a Smith & Wesson M&P Bodyguard 2.0 .380, the Magazine Speed Loader for Smith & Wesson M&P Bodyguard 2.0 .380 is the one built for your magazine. If you own a Shield EZ, the other two picks are made for that model.
Find the model name on your pistol or in its manual, then match it to the loader’s listed model. A loader made for the wrong magazine will not seat rounds properly, so this step matters more than any feature.
Once the model matches, decide how much loading strain bothers you. The maker of the Bodyguard 2.0 loader says one hand holds the magazine while the other loads, and that its large side flanges give an easy grip. For the Shield EZ, the SIEGMANNS two-pack says its thumb saver design is meant to reduce thumb pressure and hand fatigue during longer loading sessions.
Last, think about material and how many magazines you load. The Hilljak loader is plastic made in the USA from 3D printed polymer, and its maker lists a 1 year warranty. The SIEGMANNS set comes as two black plastic loaders, so one can stay in the range bag while the other stays at home.
Which loader should you buy first?
Magazine Speed Loader for Bodyguard 2.0 is the first pick if you own a Bodyguard 2.0 .380, because it is the only one of the three made for that model.
The two remaining picks are for the Shield EZ, so they will not help with a Bodyguard 2.0 magazine. Pick the loader that matches your gun first and the rest of the decision gets simple.
One point to remember: each loader is built for one model, so the model name decides the choice. If you own a Bodyguard 2.0 .380, start with the EZMAGLOADER loader.
Next, look up the model name stamped on your pistol or on its box, and match it to the loader’s listed model. That single check keeps you from buying a loader that will not seat your magazine. For more detail, see Best 300 Win Mag Ammo Storage Boxes Worth Buying.