The best Browning Citori parts for most shooters are a skeet choke tube and a matching wrench. The first pick is the Browning Midas Grade Extended Choke Tube, Skeet, 12 Gauge, which fits Browning Invector Plus 12 gauge barrels. Check your barrel type first, because both picks depend on it. Learn more in Best Chokes for Pheasant Hunting: 5 Picks and How to Choose.
The tube’s build is the main reason it ranks first. It is stainless steel with a black oxide finish and is made in the USA. Stainless steel resists rust, so the tube suits a shotgun that spends time outdoors in damp weather.
The second pick is a wrench for changing these tubes. The Browning Choke Tube Wrench is listed for 12 gauge Invector Plus tubes, so it works with the same system as the first pick. Buying both for the same barrel type keeps your setup simple.
As an Amazon Associate we earn from qualifying purchases.
How we picked: from products sold on Amazon for this need, compared by what their makers state and what buyers report in their reviews.
The Picks at a Glance
Product | Best for | Item weight | Color | Buyer rating | |
|---|---|---|---|---|---|
Browning Midas Grade Extended Choke Tube | skeet shooters | 1.92 ounces | Black | 4.6 of 5 (319 reviews) | |
Browning Choke Tube Wrench | changing Invector Plus tubes | 2.4 ounces | Multi | 4.7 of 5 (695 reviews) |
Buyer ratings as shown on Amazon on October 13, 2026; they change.
Browning Midas Grade Extended Choke Tube: Best for skeet shooters
The Browning Midas Grade Extended Choke Tube, Skeet, 12 Gauge is the first pick for skeet shooters with Browning Invector Plus 12 gauge barrels. It is a skeet choke, so it suits the shooter who wants a tube set up for that kind of shooting.
The maker states that it fits Browning Invector Plus 12 gauge barrels and is extended. Because it is listed for that barrel type only, check that your barrels are Invector Plus 12 gauge before you buy, since a 20 gauge or a non-Invector barrel falls outside what this tube is made for.
The tube is stainless steel with a black oxide finish, and the maker states it is made in the USA. For a buyer who wants American-made parts, that is the detail that counts. It weighs 1.92 ounces, so it adds little weight at the end of the barrel.
Pros
Buyers say it fits the barrel well and is well made.
Buyers say it works well and performs as expected.
Cons
It is a skeet choke, so a shooter who needs a different constriction will need another tube.
If your shooting calls for a constriction other than skeet, look at another tube for the same Invector Plus system.
Browning Choke Tube Wrench: Best for changing Invector Plus tubes
The Browning Choke Tube Wrench is the pick for changing Invector Plus choke tubes on 12 gauge barrels. It suits a Citori owner who already has Invector Plus tubes and wants a tool made for that system.
The maker lists this wrench as a mechanical T-handle with a socket end, sized in SAE (inch) measurements. Inch sizing means it is meant for the tube system you already own, so check that your barrel is 12 gauge Invector Plus before you buy.
The wrench weighs 2.4 ounces and is made of polymer. At that weight it adds little to a range bag, but the polymer body is the part to think about when you consider wear, as buyers report below.
Pros
The T-handle gives a firm grip for hand tightening and loosening.
Buyers say it fits chokes perfectly and works with Carlson’s chokes.
It is a single-purpose tool for one tube system, so you do not have to sort through universal sizes.
Cons
Buyers repeat that the teeth break off during use, so durability is poor.
It is listed for 12 gauge Invector Plus tubes, so a 20 gauge or non-Invector barrel needs a different wrench.
If you have a 20 gauge barrel or non-Invector tubes, look for a different wrench rather than this one.
How do you choose a choke tube and wrench for a Browning Citori?
Start with your barrel, because both picks depend on it. The maker lists the choke tube for Browning Invector Plus 12 gauge barrels, and the wrench is listed for 12 gauge Invector Plus tubes too. If your Citori has a different barrel type, neither pick will fit it.
Next, choose the tube for the shooting you do. The first pick is a skeet choke, so it suits skeet shooters. If you need a different constriction, you will need a different tube, so decide what you shoot before you buy.
Match the wrench to the tube system. The wrench is listed for Invector Plus tubes, so buy it for the same system as your barrel and tube. A wrench made for another system will not help you change this tube.
A T-handle is easier to grip than a small socket tool when you change tubes by hand. The wrench has a T-handle with a socket end, so you have a bar to hold and turn rather than a small fitting to pinch.
Where should you start?
The Browning Midas Grade Extended Choke Tube, Skeet, 12 Gauge is the first pick for skeet shooting with Invector Plus barrels. The maker lists it as fitting Browning Invector Plus 12 gauge barrels, so it only matches barrels of that type.
Make the barrel type your first choice, because both picks depend on it. The wrench is listed for 12 gauge Invector Plus tubes, so a barrel of another type needs a different tube and a different wrench. Before you buy, look at the markings on your barrel to confirm it is an Invector Plus 12 gauge. Then the tube and wrench will fit together and work the way you expect. You may also find this useful: Best Duck Hunting Boats and the Blinds That Make Them Work.