The best sawzall blade for you depends on the material you cut most, so start there. For pruning and thick branches, EZARC Arc Edge is the first pick: its arc edge and fleam-ground teeth are built for aggressive cuts through limbs. The maker lists a 15-inch blade length, which gives you more reach into thick limbs. For a closer look, read Best Saw for General Home Projects: What to Choose.
No single blade handles wood, metal and demolition equally well. A blade that tears through limbs will not be the right tool for thin metal pipe, so match the blade to your most common job first. Then add a second blade for the other materials you cut. For the next step, see Best Saw Blade for Hardwood Furniture Projects.
The four sets that follow cover a wider mix of materials, so you can get started with one kit instead of buying single blades one at a time.
As an Amazon Associate we earn from qualifying purchases.
How we picked: from products sold on Amazon for this need, compared by what their makers state and what buyers report in their reviews.
The Picks at a Glance
Product | Best for | Item weight | Compatible devices | Compatible material | Buyer rating | |
|---|---|---|---|---|---|---|
EZARC 15-Inch 6 TPI Pruning Blades | pruning large limbs | 0.23 kg | — | Wood | 4.6 of 5 (2,607 reviews) | |
DEWALT DW4898 10-Piece Bi-Metal Set | everyday mixed cuts | — | DEWALT reciprocating saws | Metal, Wood | 4.8 of 5 (8,338 reviews) | |
HORUSDY 10-Piece Carbon Steel Set | wood and drywall jobs | 9.44 ounces | DeWalt, Milwaukee, Porter Cable | Metal | 4.3 of 5 (3,446 reviews) | |
SEDY 10-Piece Ultimate Set with Storage Box | wood and metal in one case | 0.18 kg | Reciprocating Saws | Aluminum, Metal, Plastic, Polyvinyl Chloride (PVC), Wood | 4.4 of 5 (869 reviews) | |
WORKPRO 32-Piece Set | firewood and heavy wood cutting | 0.61 kg | most reciprocating saw brands | Plastic | 4.4 of 5 (15,442 reviews) |
Buyer ratings as shown on Amazon on October 8, 2026; they change.
EZARC 15-Inch 6 TPI Pruning Blades: Best for pruning large limbs
EZARC Arc Edge is the first pick for pruning large limbs. It fits you if most of your cuts are thick branches, and it can also handle firewood.
The maker lists a blade that is 15 inches long. It has 6 teeth per inch (TPI), a coarse tooth count that cuts fast and leaves a rougher finish. For you, that length reaches into thick limbs without you having to climb or reposition as often.
The maker says the arc edge and triple-ground offset teeth provide 3 cutting angles to reduce friction. In practice, that means the cut stays smoother and easier to control when you work through larger branches. The fleam-ground teeth and deep gullets are meant to clear material quickly, and the maker says the tooth design gives a 3x longer lifetime. You will change blades less often during a big cleanup.
The maker says the blades cut wet wood, dry wood, green timber and firewood up to 300mm, about 11.8 inches, in diameter. That covers most limbs and logs a homeowner cuts by hand. The package holds three blades, and they are made of alloy steel.
Pros
A 15-inch reach for thick limbs.
A pack of three blades.
Buyers say they cut through thick tree limbs and trunks with ease.
Buyers say they stay sharp and cut fast without going dull.
Cons
The listed compatible material is wood only, so it is a poor fit for metal or fine woodworking.
It is not compatible with Ryobi reciprocating saws, so Ryobi owners need another blade.
If you cut a lot of metal or mixed materials, look at the DEWALT DW4898 set, which is built for everyday mixed cuts.
DEWALT DW4898 10-Piece Bi-Metal Set: Best for everyday mixed cuts
The DEWALT DW4898 is a good pick if you cut both wood and metal and want one set to cover them. The maker describes it as a combination set for common applications, with blades sized from 6 to 9 inches.
In daily use, that mix means you can keep one case in the truck or on the shelf and reach for the right length without buying blades one at a time. Blades in the 6 to 9 inch range suit most homeowner trim, demolition and pipe work, but a 9-inch blade will reach deeper into a stud bay than a 6-inch one.
The maker also says bi-metal construction gives the blades flexibility and a long-lasting cutting edge. For a weekend project, a longer-lasting edge means fewer blade swaps mid-cut. A bi-metal blade is also often the better fit for smaller woodworking pieces. [1]
Pros
The case is designed to fit in a power tool kit box.
You get a range of blade lengths in one set.
Buyers say the blades cut through wood and metal very easily.
Buyers say the set offers a good variety of blade sizes and types.
Cons
Buyers say the storage case is very hard to open.
The maker lists it as compatible only with DEWALT reciprocating saws, so it will not fit other brands’ tools.
It is a general-use set, so a pruning or heavy firewood job may call for a specialized blade.
If most of your cutting is thick tree limbs, the EZARC Arc Edge is the first pick for pruning large limbs, and it suits that job better than this set.
HORUSDY 10-Piece Carbon Steel Set: Best for wood and drywall jobs
This HORUSDY set is the pick if you want one pack of blades for wood, drywall and other common materials.
The maker describes it as a combination set for common applications and says it is ideal for metal, plastic, wood and drywall. For you, that means one pack can cover most of the mixed jobs around a house without buying separate blades.
The maker describes the steel as high quality carbon steel for fast wood cutting and pruning. If most of your cuts go through lumber or branches, this steel is aimed at that work. The maker says the blades work with all major reciprocating saw brands and names DeWalt, Milwaukee and Porter Cable. If you already own one of those saws, you can use these blades without buying an adapter.
The whole set weighs 9.44 ounces. That is light enough to carry in a tool bag.
Pros
Ten blades in one pack, covering wood, metal, plastic and drywall.
Stated fit with DeWalt, Milwaukee and Porter Cable saws.
Cons
Carbon steel suits softer materials best, because bi-metal blades are usually the choice for tough materials [2].
If you cut a lot of hard metal, the DEWALT set below is the better fit.
SEDY 10-Piece Ultimate Set with Storage Box: Best for wood and metal in one case
The SEDY 10-Piece Ultimate Set is the pick for buyers who want wood and metal blades in one case. Its blades are 6 and 8 inches long, which covers most household cutting jobs.
The maker lists four 6-inch and two 8-inch wood blades at 6 TPI, two 6-inch metal blades at 18 TPI, and two 6-inch blades at 10 to 14 TPI for wood and soft metal. TPI means teeth per inch. For you, that means one box covers rough wood cuts and thin metal without a second purchase.
The maker says the wood blades are made from Cr-V steel and the metal blades are bi-material, so each kind is built for its job. The whole set weighs 0.18 kg, so it is light to carry in a tool bag. The maker also lists use with reciprocating saws on aluminum, metal, plastic, PVC and wood.
Pros
A storage box keeps the blades together and easy to find.
Wood and metal blades come in one set, so you do not buy two kits.
Blades for aluminum, plastic and PVC are included along with wood and metal.
Cons
Six of the ten blades are 6 TPI wood blades, so for fine metal work you need to pick the right blade from the set.
The longest blade is 8 inches, so it reaches less far into thick limbs than a 15-inch pruning blade.
If you mostly prune large limbs, look at EZARC Arc Edge, the first pick, instead.
WORKPRO 32-Piece Set: Best for firewood and heavy wood cutting
The WORKPRO 32-Piece Set is the pick for firewood and heavy wood cutting, and it suits you if you want one box for wood, pruning and light metal. It is compatible with most standard reciprocating saws.
The wood blades are Cr-V steel for coarse wood and firewood from about 3/4 inch to 7 inches thick. That covers most rounds you would split for a woodstove, but a log thicker than 7 inches needs a second pass from the other side.
A pruning blade handles limbs up to 180 mm, about 7 inches, across. The metal blades are bi-material for metal from 0.7 to 8 mm thick, plus pipes and profiles from 5 to 100 mm in diameter. Thin sheet and conduit are both within reach, so one set can cover yard work and light repairs.
Pros
32 pieces come with an organizer pouch.
The thickness range covers both wood and metal.
The set is listed as suitable for cutting metal, plastic, wood, and drywall.
Cons
The wood blades are not suitable for wood with nails, so check boards before cutting.
Its longest blade is 9 inches, shorter than the 15-inch EZARC Arc Edge, so it reaches less far into big limbs.
Buyers who mostly cut thick limbs should look at EZARC Arc Edge, the first pick for pruning large limbs.
How do you choose the right sawzall blade for your job?
Start with the material you cut most. Wood, pruning, metal and mixed work each suit a different tooth count and steel, so that choice comes first.
Teeth per inch (TPI) controls how aggressive and how smooth the cut is. Fewer teeth suit coarse wood and thick stock, while more teeth leave a finer cut on thin metal.
The WORKPRO set shows that spread. It includes 3 TPI wood blades for coarse wood and 24 TPI blades for thin metal. If your work mixes wood and metal, you want both ends covered.
The SEDY set pairs 6 TPI wood blades with 18 TPI metal blades. Its maker says the wood blades use Cr-V steel and the metal blades are bi-material. Bi-material blades are a metal-and-steel construction designed to hold up under metal cutting.
Bi-metal blades resist shattering and suit most metal work [3]. That makes them a practical all-round choice when you cannot own a blade for every job. The DEWALT set’s maker adds that bi-metal construction gives flexibility and a long-lasting cutting edge.
Blade length sets your reach. The EZARC pruning blade is 370mm long, with a 320mm working length. Its maker says it cuts firewood up to 300mm in diameter, so a longer blade reaches thicker stock. Keep a long blade well supported as you cut, since the extra length is harder to steady.
Which blade should you start with?
EZARC Arc Edge is the first pick for pruning large limbs, and it is the one to start with if branches are your main job. Its 15-inch blade has 6 teeth per inch. That reach lets you work into thick limbs, and the blade cuts wood up to 300mm in diameter, roughly 12 inches. For a yard with big limbs to cut back, that covers most of the work.
For almost every other job, the rule is simple: start with the material you cut most, then match the teeth per inch (TPI) to it. Fewer teeth cut wood faster, and more teeth give a smoother cut in metal. One set lists 6TPI for wood, 18TPI for metal, and 10-14TPI for wood and soft metal, which shows how the tooth count changes with the material.
If you cut both wood and metal, a set with blades for each covers both without buying blades one at a time. If you mostly cut one thing, a smaller pack of the right blades is enough. Write down the material you cut most in a typical month, then pick the blade that matches it.