Wensilon 30-pack is the first pick for a small brick job, since its sheet gives it one size rated for brick, block and stucco. If you need to fix a few wood pieces to a brick wall, that single size keeps the choice simple.
You need masonry screws, not wood screws, for brick. A wood screw is not made to cut into masonry, so the screw has to cut its own threads into the brick to grip it [1]. Masonry screws are hardened to do that job, which is why every pick below is a concrete or masonry screw.
Five kits follow, in order, each for a different buyer. Start with the one that matches your number of fixings, your wood thickness and whether the wall is outside.
Key takeaways
Start with the Wensilon 30-pack for a small job.
Choose masonry screws for brick, not wood screws.
Match the screw length to your wood thickness.
As an Amazon Associate we earn from qualifying purchases.
How we picked: from products sold on Amazon for this need, compared by what their makers state and what buyers report in their reviews.
The Picks at a Glance
Product | Best for | Fastener size | Size name | Thread size | Buyer rating | |
|---|---|---|---|---|---|---|
Wensilon 30-Pack Hex Screws | small brick fixing jobs | 3/16″ * 1-1/4″ | 3/16″ * 1-1/4″ | 0.2 in | 4.3 of 5 (1,144 reviews) | |
FixMaster 100-Piece Kit | bulk wood-to-brick jobs | 3/16 x 1-1/4″ | 3/16 x 1-1/4 in | See Product Details | 4.6 of 5 (237 reviews) | |
Wensilon 105-Piece Assortment | mixed-thickness wood | 3/16″ x 1-1/4″ (Blue/Black/White Flat Head) | 3/16″ kit | 3/16″ | 4.3 of 5 (1,923 reviews) | |
Velocity 2 1/4 Kit with RedSeal | exterior wood on brick | No. 2 | FLAT | 1/4” x 2 1/4” | 4.4 of 5 (895 reviews) | |
Bobibbi 100-Piece Hex Screws | large brick batches | 3/16 x 1-1/4″ | 3/16 x 1-1/4″ | 3/16 x 1-1/4” | 4.4 of 5 (735 reviews) |
Buyer ratings as shown on Amazon on October 13, 2026; they change.
Wensilon 30-Pack Hex Screws: Best for small brick fixing jobs
The Wensilon 30-pack is the first pick for a small brick fixing job, such as a homeowner fastening a few wood pieces to brick or stucco. It is one size, 3/16-inch by 1-1/4-inch, and the maker rates it for masonry, block, brick and stucco.
The maker describes these as slotted hex concrete screws, and the 1-1/4-inch length is the figure to check against your wood thickness plus the depth you need in the brick. Because the pack is one size, you do not have to match several lengths before you start drilling.
The maker says the carbon steel is hardened and has a blue rust finish for corrosion resistance. For a fixing that sits outdoors or near damp, that finish helps the steel last longer than bare metal, though it is not a moisture barrier. The maker also recommends a 5/32-inch carbide tip drill bit for the pilot hole, so you will need that bit on hand before you start.
Pros
One size and a clear use case for brick, block and stucco
Small pack suits a short list of fixings
Buyers say the screws are easy to use and install
Buyers say the kit includes the drill bit and nut driver needed
Cons
Only 30 pieces, so a larger wall runs out quickly
Buyers report that the screws and the drill bit break easily
Buyers report that the screws would not drill through mortar or brick
If you have a larger wall or need exterior protection, look at the FixMaster 100-Piece Kit or the Velocity kit with RedSeal instead.
FixMaster 100-Piece Kit: Best for bulk wood-to-brick jobs
The FixMaster 100-Piece Kit is the pick for a bulk wood-to-brick job, where you need a large supply of one size and do not have a bit or driver on hand. The kit includes 100 screws, one drill bit and one screwdriver bit, so you can start right away. You may also find this useful: Best Deck Screws: How to Choose the Right Type.
The maker lists the screws as 3/16 by 1-1/4 inch, and the drill bit is a carbide-tipped bit for making a 5/32-inch pilot hole in brick and wood. For you, that means one bit makes every hole in the kit, so you do not need to switch bits partway through a wall. The hex-style drive is not used here; the head is countersunk Phillips, so it sits flush with the wood. Learn more in Bosch Daredevil Multipurpose Drill Bits vs Masonry Bits.
The maker lists concrete, block, mortar, brick, wood, drywall and stucco among the uses, and says the high and low threads and wide serrated threads drill faster. In daily use, that means a long run of fixings goes quicker than with a slower-drilling screw. The blue epoxy coating is rated for 1,000 hours of hydrochloric acid corrosion, and the maker notes it suits hurricane or damp areas. If you fix wood on an exterior wall, that coating matters because rain and damp reach the head.
The maker sets rules for installation: each screw needs at least 1 inch of embedment in the base, at least 3 inches between screws center to center, and at least 2-1/4 inches from an unsupported edge. For a wall, that means you lay out your rows before drilling, so the spacing stays within these limits.
Pros
A drill bit and screwdriver bit come in the box.
Enough screws for a large job at one size.
Buyers say the screws go in quickly with the included bit.
Cons
Only one size, so it does not cover longer fixings for thicker wood.
If your wood is thicker or your fixings need a different length, look at the Wensilon 105-Piece Assortment, which covers several lengths. Choose Wensilon 30-pack for a small job with fewer fixings.
Wensilon 105-Piece Assortment: Best for mixed-thickness wood
The Wensilon 105-Piece Assortment is the pick for fixing wood of different thicknesses to brick, such as furring strips over a wall. It packs three lengths into one box, so you can match each fixing to its board without buying several boxes. The maker lists 30 pieces at 1-1/4 inch, 45 at 1-3/4 inch and 30 at 2-1/4 inch.
A 1-1/4-inch screw suits thin strips, while the 2-1/4-inch length gives you more grip for thicker boards. Pick the length by adding the board’s thickness to the depth you need in the brick, then choose the next size up if you are unsure. The maker says these screws are designed for fastening into concrete, brick, block and stucco.
The steel is hardened and has a rust-resistant coating. The screws come in blue, black or white, so you can match the finish to the trim or fixture you are mounting. The flat head is countersunk, so it sits flush with the wood instead of standing proud of it.
Pros
Three lengths cover a range of wood thicknesses in one box.
Three finishes help you match the screw to the project.
Buyers say the screws are easy to work with and install.
Buyers say the screws suit many different projects.
Cons
Buyers report that some screw heads break, so the fixing may not be as reliable as you want.
Buyers say the included drill bit is weak, especially on mortar, so plan on your own bit.
Only 30 pieces come in each length, so one long run can use up one size quickly.
If you need one size in large numbers, look at the Bobibbi 100-Piece Hex Screws instead.
Velocity 2 1/4 Kit with RedSeal: Best for exterior wood on brick
The Velocity 2 1/4 kit with RedSeal is the pick for wood fixed outdoors to brick, where rain and damp can reach the screw. Its moisture barrier and flat heads make it a fit for exterior trim and fencing work on a brick wall.
For you, that means water is less likely to run down the shank into the wood and the brick, which matters most on a porch rail or a gate post that sees weather every day.
The maker lists flat-head 1/4-inch screws, 2 1/4 inches long, designed for concrete, masonry block and brick, including for stucco. A flat head sits flush with the wood surface, so trim pieces lie flat against the brick. The 2 1/4-inch length gives enough bite to go through the wood and grip the masonry behind it.
Pros
Built with a moisture barrier for outdoor wood-to-brick work
Kit includes a drill bit and a driver bit, so you do not need to buy them separately
Buyers say the screws work well in concrete and brick and are easy to work with
Cons
Only 12 screws, which is a short run for a larger exterior project
Buyers report screw heads breaking off or snapping, so durability is a concern for some
If you have a long run of fencing or siding to fix, look at the 100-piece FixMaster kit instead, since 12 screws will run out quickly.
Bobibbi 100-Piece Hex Screws: Best for large brick batches
The Bobibbi 100-piece hex screw pack is the pick for a buyer who needs a large supply of one size for repeated brick fixings. The pack holds 100 hex-head screws, each 3/16 by 1-1/4 inch, rated for masonry, block and brick.
The maker lists the screws as made from 1022A carbon steel and says they resist hydrochloric acid corrosion for 1,000 hours. For a buyer, that means the fixings are meant to hold up in damp or acidic conditions, though a long run of brick fixings will still use up the pack quickly.
The maker also describes high and low threads and a diamond tail for faster drilling. In daily use, that means you spend less time forcing each screw into the brick, which adds up across dozens of fixings.
Pros
One size in a large pack, so you rarely run short on a big job.
High and low threads and a diamond tail speed up drilling.
Buyers say the screws work well, including on block walls.
Buyers say the pack costs about half the price of name-brand alternatives.
Cons
No drill bit or driver is included, so you need your own bit and driver.
Buyers report that some screw heads break off during driving.
Buyers report that the screws do not grip well in the hole.
If you need a few fixings or longer screws for thicker wood, the Wensilon 30-pack or the FixMaster kit may suit you better.
How do you choose the right masonry screw for wood on brick?
Choose the screw by checking the wood, the length, and where the fixing will sit. The wood decides the coating. Treated lumber needs a screw with a special coating, not a plain steel finish, or the fastener can fail early [2].
The screw has to pass through the wood and bite into the brick. Add the wood’s thickness to the depth the brick needs, then pick the next length up. FixMaster’s kit calls for at least 1 inch of anchor in the base material. For that 1-1/4-inch screw, FixMaster lists a maximum fixture thickness of 0 to 0.25 inch, so a thicker board needs a longer screw.
Outdoors, look for a moisture barrier or a rust-resistant finish. The Velocity kit uses a RedSeal silicone gasket barrier for moisture protection. The Wensilon assortment is made from hardened steel with a protective rust-resistant coating.
Wear eye protection and a dust mask when you drill brick, since the dust and chips fly. Check for wires or pipes before you drill. A hidden line can turn a quick job into a repair.
Which screw should you buy first?
Choose the screw length first, because it decides whether the fixing grips the brick. A screw that is too short sits in the wood and never reaches solid masonry, so it holds loosely. Pick a length that passes through your wood and still leaves room to bite into the brick.
For a small job, the Wensilon 30-pack is the first pick. It comes in one size, 3/16 inch by 1-1/4 inch, and the maker rates it for masonry, block, brick and stucco. That single size makes it easy to buy: you do not have to guess between lengths for a few shelf brackets or a short batten.
Before you drill, remember that the pack is small. Thirty screws cover a few fixings, not a long wall, so count your holes first and pick a larger kit if the list is longer.
When you are ready, drill the pilot hole, drive the screw and check that the head sits snug against the wood.