For the DeWalt 60V cordless mixer vs. Makita 18V XTU02, choose the mixer with a verified match for your material and batch size; the available evidence confirms only that the Makita weighs 6.6 pounds with a 5Ah battery [1]. It does not provide comparable specifications for both mixers, so it cannot establish which has more power or longer runtime. For more detail, see . DeWalt 60V Cordless Mixer Review: Uses and Limits.
That distinction matters when you’re mixing a small batch of material for a repair versus working through a larger batch: a model’s suitability depends on the job, and a head-to-head recommendation needs comparable information. This comparison should therefore start with the mix you plan to make, how much you need to mix at once, and specifications verified for both models—not an assumed winner based on voltage alone.
For the Makita, the confirmed weight can help you judge whether its listed configuration suits how you expect to handle the tool. For example, if you will hold the mixer while working, its 6.6-pound figure with the 5Ah battery gives you a concrete starting point [1]. The source does not give a corresponding DeWalt weight, so it does not support a weight comparison.
Before choosing, check that each mixer is specified for your material and batch size, then compare matching details such as weight and runtime under comparable conditions. The evidence here does not establish those matches or provide comparable power and runtime figures. Treat the Makita’s stated weight as a useful fact, not proof that it is the better choice for every job; select the DeWalt only if you can verify that it fits your intended work as well.
Key takeaways
Match the mixer to your material and batch size.
The Makita XTU02 weighs 6.6 pounds with a 5Ah battery [1].
Available evidence does not support declaring a power or runtime winner.
How do the DeWalt and Makita compare at a glance?
The Makita XTU02 has one confirmed comparison point here: it weighs 6.6 pounds with a 5Ah battery, while the available source does not confirm comparable DeWalt details. [1]
Model | Battery platform | Confirmed weight | Suitable-use evidence |
|---|---|---|---|
Makita XTU02 | 18V | 6.6 pounds with a 5Ah battery [1] | The source describes it as a cordless mixer, but does not establish which materials or batch sizes it suits. [1] |
DeWalt 60V cordless mixer | 60V, as named in the comparison topic; other platform details not confirmed | Not confirmed | Not confirmed; the available source gives no task, material, or batch-size guidance for this model. [1] |
For a quick comparison, the Makita’s listed weight gives you a concrete reference point, but it is tied to a specific 5Ah battery configuration. [1] The source does not provide a DeWalt weight, so you cannot use it to decide which mixer is lighter or easier to handle. [1]
The evidence also does not support a head-to-head judgment about mixing performance, suitable materials, or workload. [1] For example, if you are choosing a mixer for a particular compound or batch size, check the manufacturers’ specifications and instructions for those tasks rather than treating the voltage labels as a performance comparison. [1]
In practical terms, this table is a partial comparison, not a ranking: it confirms one Makita weight and leaves the DeWalt weight and both models’ task-specific suitability unverified. [1] Before choosing, compare confirmed details for the exact tool and battery setup you plan to use, along with guidance for your intended material and workload.
Which mixer may feel easier to handle?
The Makita XTU02 has a reported weight of 6.6 pounds with a 5Ah battery, but you should check the DeWalt’s listed weight before deciding which mixer will feel easier to handle. [1] The Makita figure comes from a single source, so treat it as one reported measurement rather than a side-by-side comparison.
Why weight matters while mixing
A mixer’s weight includes the tool and the battery you use. As you hold it through a mixing task, that combined load can affect how easy it feels to guide and steady; the difference may matter more during a longer session than during a quick stir. The reported Makita figure includes its 5Ah battery, which makes it more useful than a bare-tool number when you’re comparing what you’ll actually lift. [1]
For example, if you’re mixing a bucket of compound and need to keep the paddle centered, think about how long you’ll hold the tool in position, not just how it feels for a few seconds in a store. A lighter setup may feel easier to control over that task, but weight alone does not establish which mixer is the better fit for your materials or workload.
Check the DeWalt’s complete weight
Before choosing, look up the DeWalt 60V mixer’s weight in its manual or product specifications, and check whether the listed figure includes a battery. The available source gives a battery-included weight for the Makita but provides no DeWalt weight, so it does not support a direct weight comparison. [1]
Compare the DeWalt figure on the same basis: tool with battery against tool with battery, rather than a battery-equipped Makita against a bare DeWalt. If the DeWalt documentation does not make the battery configuration clear, confirm which battery the listed weight uses before relying on the comparison. Then consider your own mixing routine: a short batch may make weight less noticeable, while extended holding can make a small difference in handling more relevant. The source does not establish how either mixer feels for every user, so use the specifications as a starting point and, if possible, handle the complete setup before buying.
What should you check for power and mixing materials?
Check each mixer’s stated capacity and manufacturer guidance against your material and batch size; voltage alone does not tell you which one will mix better. For a small batch of a familiar material, the right choice is the model whose instructions cover that material and amount—not simply the one with the larger voltage label.
Match the material and batch
Before buying or mixing, look for the manufacturer’s guidance on the materials each model can handle and the batch size it supports. If you plan to mix a small bucket of one product, confirm that exact use is covered; if you plan to mix a larger batch, check that too. The available source information here does not provide material-specific approvals, capacity figures, or batch limits for either the DeWalt 60V mixer or the Makita 18V XTU02, so don’t assume one supports a particular product or volume.
Use the instructions for the material you actually have. A paddle or mixer suitable for one product may not be suitable for another, so check both the mixer guidance and the material maker’s directions before starting. If the instructions do not clearly cover your material or batch, contact the manufacturer rather than guessing.
Compare speed and paddle details carefully
Compare speed ranges and compatible paddles only when you can confirm the details for both models. The source information provided does not establish either model’s speed range or compatible paddle sizes, so it would be misleading to claim that one offers a wider range or accepts a particular paddle.
When you compare product documentation, look for the stated speed settings and the paddle types or dimensions the manufacturer allows. Then check whether those details fit the material and batch you expect to mix. A listed feature is useful only if it is confirmed for the specific model you are considering.
Don’t use voltage as a performance verdict
The 60V and 18V labels identify the two products in this comparison, but they do not establish which mixer will perform better for your material or batch. Choose based on confirmed capacity, manufacturer guidance, speed information, and paddle compatibility—not voltage alone.
For example, if you are deciding between the DeWalt and Makita for a planned job, first find the documentation for that exact model and compare the same material and batch requirements. If the published information does not answer those questions, pause the comparison and ask the manufacturer or retailer for the relevant specifications. That gives you a practical basis for choosing without treating an unverified assumption as a product fact.
Does your existing battery platform change the choice?
Your existing battery platform can make one mixer the more practical choice, but check the exact model and package before you decide. A battery that fits another tool in the same brand’s lineup is not enough to confirm compatibility with the mixer.
Check the exact battery fit
Look up the battery system listed for the specific DeWalt or Makita mixer you’re comparing. Then check your battery’s model and the mixer’s compatibility information rather than relying on the brand name or voltage label alone.
For example, if you already own Makita 18V tools, that may be a reason to consider the XTU02—but confirm that your particular battery is supported and note whether the mixer package includes one. Apply the same check to the DeWalt 60V mixer if you already use DeWalt batteries. The source material provided here does not include either manufacturer’s compatibility details, so verify them in the product documentation before buying.
Compare what comes in the box
Compare package contents, not just the mixer’s listed platform. Check whether each option includes a battery or charger, and record the battery model and capacity shown in the listing or manual. If one package is tool-only and the other includes a battery and charger, the upfront package contents differ; make sure the comparison reflects what you actually need.
For instance, if you already have a compatible battery and charger, a tool-only package may suit your setup. If you have neither, compare complete packages and confirm that the included battery and charger work with the exact mixer. Do not assume a battery is included just because a listing names its voltage or platform.
Don’t predict runtime from voltage
Voltage alone does not tell you how long a mixer will run on a charge. Compare manufacturer runtime information for the exact tool and battery, if available, or use a representative job test rather than turning the 60V and 18V labels into a runtime estimate.
A useful comparison would use the same material, batch size, mixing attachment, and work pattern, with the battery specified for each tool. If you can’t find comparable manufacturer data or conduct a similar test, treat runtime as unknown instead of declaring one mixer the longer-running option. Your battery choice may affect convenience and package value, but it is not a substitute for evidence about runtime.
What should you verify before buying either mixer?
Before you buy either mixer, verify the exact model, complete weight, operating limits, and what comes in the box; product names alone do not tell you whether a setup fits your work. Compare current manufacturer information and seller listings, then check that the mixer and paddle suit the material you plan to mix.
Confirm the exact model and setup
Check the model number on the listing and on the product documentation, rather than relying only on “DeWalt 60V” or “Makita 18V XTU02.” Product names can be easy to mix up, and the exact model helps you compare like with like.
Look for the tool’s weight with the battery installed, not just its bare-tool weight. If you expect to mix for a while or carry the tool between rooms, compare the complete setups you would actually use; a battery can change how heavy the tool feels in your hands.
Check speed settings and paddle fit
Compare the available speed settings and controls in the instructions for each exact model. Think about your typical job: mixing a small amount of a thicker material may call for different control than stirring a larger batch of a thinner material. Do not assume two mixers with different battery platforms handle the same way.
Check the paddle’s connection and dimensions against the mixer’s instructions before buying a paddle separately. For example, if you already own a paddle, confirm that its fitting is compatible; if you are buying both, verify that the listed paddle is intended for that mixer. A compatible connection alone does not establish that a paddle is suitable for every material or batch size.
Match the mixer to your material
Use the manufacturer’s instructions to confirm the intended materials and operating limits. Check any stated guidance on the material, batch size, speed, and run time, and do not treat a general product description as a substitute for those instructions.
If you plan to mix something different from the examples in the manual, contact the manufacturer or choose a tool whose instructions clearly cover that use. Avoid guessing based on voltage, brand, or how powerful the mixer looks.
Compare warranty and package contents
Review the current warranty terms and the listing’s package contents before comparing prices. One offer may include a battery, charger, or paddle while another may list the tool alone; check each item rather than assuming the packages match.
Listings and included accessories can vary, so confirm the details with the seller or manufacturer at the time you buy. Before checkout, make a short checklist: exact model, weight with battery, speed settings, paddle fit, material guidance, warranty, and included items. If a listing leaves one of those unclear, verify it before you commit.
Which one should you choose?
For this choice, compare the work each mixer can handle, how it feels in your hands, and whether its battery fits the tools you already own—not just the voltage on the label. The available source reports that the Makita XTU02 weighs 6.6 pounds with a 5Ah battery, but it does not establish which mixer performs better. [1]
Before you decide, match the mixer to a real job. If you expect to stir a particular material or batch size, check each model’s current specifications for that use; don’t assume the higher voltage alone means it is the better fit. The evidence here does not provide verified material-capacity details for a direct comparison, so confirm those details rather than guessing.
Handling matters, too. The reported 6.6-pound figure for the Makita includes its 5Ah battery, which gives you a specific loaded-weight reference when considering how the tool may feel during mixing. [1] If possible, compare the tools with their batteries installed and pay attention to grip, balance, and how comfortably you can guide the paddle.
Your next step is to check the current DeWalt model specifications and compare them with the exact Makita XTU02 configuration you would buy. Then confirm that the battery platform suits your existing tools and that each mixer is specified for your intended material and batch. The key takeaway: choose by verified capacity, handling, and battery compatibility, and don’t treat voltage labels as a performance verdict.