SawHaul listings describe scabbards in 20-, 28-, and 36-inch lengths, but the right choice depends on how your saw’s bar fits the scabbard—not just the chainsaw model. Measure the bar, compare that measurement with the scabbard length, and check the product details before choosing. [1][2]
That check matters because bar fit and carrier fit are separate questions: the scabbard holds the saw, while the mounting dimensions determine whether the carrier attaches to your equipment. SawHaul listings mention different mounting options, so confirm the relevant dimensions for your tractor, tubing, or ROPS setup before ordering. [1][2]
Match the bar to the scabbard
Start by measuring the chainsaw bar from the point where it exits the saw body to its tip. Then compare that measurement with the listed scabbard length and the product details. The available listed lengths are 20, 28, and 36 inches. [1][2]
For example, if your bar measures 20 inches, look at the 20-inch option first and confirm the product details say it suits your saw. If your bar is longer than a listed scabbard, don’t assume the saw will fit; check with the seller or choose an option whose details confirm compatibility. The listings provided give scabbard lengths, not a universal rule for how much extra room a bar needs. [1][2]
Check the mount separately
A scabbard length that suits your bar does not, by itself, confirm that the carrier will fit your equipment. One listing says its carrier is designed for round or square tubing up to 3¼ inches thick. [1] Another describes standard mounting dimensions as a width range beginning at 4 inches, but the available listing text is incomplete, so check the full product details for the complete range and the mount you need. [2]
Before buying, note your bar length and measure the equipment where the carrier will attach. Compare both measurements with the specific product listing; if either one is unclear, ask the seller to confirm the fit for your saw and mounting location. This avoids treating a listed scabbard size as proof that the complete carrier will work with your setup.
What do SawHaul’s listed lengths mean?
SawHaul’s listed scabbard lengths are 20, 28, and 36 inches, so compare your chainsaw’s bar length with the length shown for the carrier you’re considering.[1][2] A broad claim such as “fits all chainsaws” is not enough to confirm a fit for your particular saw; check the details for the specific carrier and saw.[3][2] For more detail, see . SawHaul Chainsaw Carrier vs Toolbox Mount: Which Fits?.
Match the bar to the listing
Start by checking the bar length on your saw, then compare it with the scabbard length in the product listing. For example, if your saw has a 20-inch bar, look at the 20-inch scabbard listing; if it has a 28-inch bar, compare it with the 28-inch listing.[1][2] The available listed lengths are 20, 28, and 36 inches.[1][2]
Treat that comparison as a first check, not a promise of fit. The listings identify scabbard lengths, but the supplied product descriptions do not explain how a saw’s body, handle, or other parts affect fit. If the listing leaves those details unclear, confirm them with the seller before choosing.
Check what “fits all” means
Some product copy says a SawHaul carrier “Fits All Chainsaw Sizes,” while another listing says it fits all chainsaws and identifies scabbards from 20 inches up to 36 inches long.[3][2] Those broad claims do not tell you whether every saw model will fit a particular scabbard. Check the model-specific details rather than assuming that the universal wording covers your saw.[3][2]
For example, a listing that mentions a 36-inch scabbard is useful if your bar length is 36 inches, but it does not by itself confirm that your exact saw fits. Look for the selected scabbard length and any fit information that names or describes your saw model. If you cannot find that information, ask the seller to confirm compatibility before you buy.
Make the choice practical
Write down your saw’s bar length, then select a listing with a matching stated scabbard length where available. SawHaul listings show 20-, 28-, and 36-inch options, so a bar length that differs from those options needs closer checking rather than an assumption that the nearest listing will work.[1][2]
Keep the distinction clear: the listed number is the scabbard length, while your question is whether your particular saw fits it. Use the length comparison to narrow your choice, then verify the specific model details for a confident match.
How should you check your chainsaw’s fit?
Check the chainsaw’s bar length, then compare the scabbard’s listed length and confirm any uncertain fit with the SawHaul seller. A bar-length label is not the same thing as a measurement of the whole saw, so use the scabbard—not the saw’s overall length—as the comparison point.
Find the bar length shown for your saw. Check the saw’s label, manual, or product listing for the bar length. For example, if the listing describes a saw as having a 20-inch bar, treat that as the bar measurement; don’t assume the complete saw is 20 inches long. E1 and E4 list SawHaul scabbard lengths, but neither source explains how to measure a chainsaw or says that bar length alone guarantees fit.
Check the scabbard’s listed length and the seller’s fit guidance. The SawHaul product information lists scabbards in 20-, 28-, and 36-inch lengths. [2] Another SawHaul listing also shows 20-, 28-, and 36-inch length options. [1] Compare your saw’s bar length with the scabbard length shown for the specific carrier you’re considering, and read any fit notes provided by that seller. For instance, if your saw has a 28-inch bar, check the listing for a 28-inch scabbard rather than guessing from the saw’s total length.
Ask the carrier seller if the fit is unclear. Neither available listing gives a detailed fit chart matching every chainsaw model to a scabbard, so don’t treat the listed lengths as a guarantee for every saw. If your bar measurement falls between listed options, or the saw has an unusual shape or configuration, send the seller the saw’s model and bar length and ask which scabbard they recommend before buying.
Before ordering, confirm that the product listing is for the carrier and scabbard setup you intend to use. The two listings both show a 20-, 28-, and 36-inch range, but one describes a carrier for tubing and ROPS while the other is a tractor carrier listing. [1][2] Checking the exact listing helps you avoid relying on a length shown for a different product page. If the seller cannot confirm the match, hold off rather than assuming that a scabbard will fit based on the bar-length number alone.
Will the carrier mount on your equipment?
Check the mounting dimensions of the specific SawHaul model against your equipment before buying; the carrier’s fit depends on the mount, not just the chainsaw. Measure the tubing or mounting area where you plan to attach it, then compare that measurement with the listing for the exact version. [1][2]
Measure the equipment, not just the saw
For a round or square tube, measure across the section the mount will clamp around. One SawHaul listing describes a version designed for round or square tubing up to 3 1/4 inches thick. [1] If your equipment has a tube larger than that, or a differently shaped mounting point, do not assume this version will fit; confirm compatibility with the seller before ordering.
For a flat mounting area, check the carrier’s stated mounting width and compare it with the usable space on your equipment. Another listing gives a standard mounting width range, but the source text is incomplete, so verify the full dimensions for the exact model before purchase. [2] For example, if you are fitting a carrier to a tractor loader, check that the intended mounting area matches the listed mount dimensions and leaves room for the carrier to sit securely.
Confirm the exact version
SawHaul listings can describe different mounting options, so do not transfer a dimension from one version to another. [1][2] Before placing an order, identify the model or mounting option, check whether it is meant for tubing or a standard mount, and compare its complete dimensions with your equipment.
If the listing does not clearly show the measurement you need, send the seller the equipment’s mounting shape and measured size and ask for a fit confirmation. This is especially useful when the mounting point is curved, obstructed, or not a straightforward round or square tube. A few minutes spent checking the mounting interface can help you avoid choosing a carrier that suits your chainsaw but cannot attach to your machine.
Which SawHaul length should you choose?
Choose a SawHaul scabbard length that matches your chainsaw’s bar, then verify the exact carrier listing for the fit and mount dimensions. The available options shown are 20, 28, and 36 inches; the listings do not give a brand-by-brand or engine-size fit chart. [1][2]
Scabbard option | What the listing says | Practical check |
|---|---|---|
20 inches | The SawHaul listing shows a 20-inch length, and the tractor listing includes a 20-inch scabbard option. [1][2] | If your bar is 20 inches, start by checking this version’s product details; confirm how the listing defines fit before ordering. |
28 inches | For a 28-inch bar, compare the scabbard’s listed length with the bar and confirm the exact carrier version. | |
36 inches | The tractor listing includes a 36-inch scabbard, and the SawHaul listing shows a 36-inch length. [1][2] | If you have a 36-inch bar, verify the product listing and the mount dimensions rather than assuming every SawHaul kit is identical. |
The three listed lengths give you a straightforward starting point: compare your saw’s bar length with the 20-, 28-, and 36-inch options, then confirm fit on the specific product page. [1][2] The tractor listing says the carrier fits chainsaws generally and describes two mounting sizes, while the tubing-and-ROPS listing specifies mounting on round or square tubing up to 3¼ inches thick. [2][1] Those mount details matter if you’re choosing a carrier for a particular tractor, ROPS, or other support.
Don’t pick a carrier based only on the chainsaw brand or engine size; the available listings focus on scabbard lengths and mount dimensions. [1][2] For example, if your bar is 28 inches, use the 28-inch listing as your first comparison, but check the exact version’s fit notes and whether its mount suits your equipment. If the bar length falls between the listed choices, or the product page does not clearly explain fit, contact the seller with your saw’s bar length and the carrier’s intended mounting surface before ordering.
What should you confirm before ordering?
Before ordering a SawHaul carrier, confirm the exact model, its scabbard length, your saw’s bar length, and the dimensions of the mounting surface. Those checks help you spot a mismatch before the carrier arrives, especially if you’re choosing between equipment-mounted versions.
Match the carrier and scabbard to your saw
SawHaul listings describe scabbards in lengths from 20 to 36 inches, with listed options including 20, 28, and 36 inches. [2] Check the specific carrier listing for the option you plan to buy; don’t assume every model includes every length. [1][2]
Then compare the scabbard length with your chainsaw’s bar length and any fit guidance provided by the seller. The available product information does not explain how much extra clearance a scabbard needs, so confirm compatibility with the seller rather than guessing from the bar measurement alone. For example, if your saw has a 20-inch bar, ask whether the 20-inch scabbard is suitable for that saw and its cover before ordering.
Check the mount against your equipment
For the tubing and ROPS carrier, the listing says it is designed for round or square tubing up to 3 1/4 inches thick. [1] Measure the actual surface where you want to attach it, and check whether its shape and thickness fit that model’s stated limit. [1]
The tractor-carrier listing gives two mounting sizes and shows a standard width range beginning at 4 inches and ending at 7 3 inches in the supplied listing text. [2] Because that text appears incomplete, verify the full mounting dimensions with the seller before relying on the range. Measure a flat, usable section of your equipment, not just the outside width of a nearby frame member.
Confirm the exact listing before checkout
Write down your saw’s bar length, the scabbard length you want, and the mounting surface’s shape and measurement. Give those details to the seller and ask them to confirm that the exact carrier model fits both your saw and equipment. This is a useful final check if your saw has a bar length other than the listed scabbard options, or if your mounting point is close to the carrier’s stated limit.
Also verify that the product page is for the mounting style you need: the sources describe a carrier for tubing and ROPS as well as a tractor-oriented carrier. [1][2] A match on scabbard length alone does not confirm that the attachment will suit your equipment.
Measure first, then match the model
Before choosing a SawHaul carrier, write down your chainsaw’s bar length and the dimensions of the place where you plan to mount it, then compare both with the exact model listing. Carrier fit depends on more than the saw: the available descriptions also specify mounting requirements, and those can vary by carrier.
Check the saw and scabbard
Measure the bar or the scabbard you intend to carry, and use the measurement the product listing asks for. One SawHaul tractor-carrier listing describes scabbards from 20 to 36 inches, with 20-, 28-, and 36-inch options.[2] That gives you a useful range to compare against, but it does not confirm that every carrier model accepts every saw or scabbard in that range.
For example, if your scabbard is 28 inches long, check that the specific listing includes a compatible length rather than assuming that a different SawHaul model has the same fit. If your saw’s bar length and scabbard length differ, record both; the available listing refers to scabbard length, so ask the seller which measurement governs fit.[2]
Measure the mounting location
Check the shape and size of the tube, rail, or other mounting point where you want to install the carrier. A SawHaul listing for tubing and ROPS says its mount is designed for round or square tubing up to 3 1/4 inches thick.[1] Measure the mounting point across the relevant dimension and compare it with the limit shown for the exact carrier you’re considering.
The tractor-carrier listing gives a separate mounting-size description, including a standard width range beginning at 4 inches and ending at a truncated figure in the available text.[2] Because that source text does not show the complete upper limit, don’t use it to decide that a particular mounting width will fit. Confirm the full specification with the seller.
Make the final check
Before ordering, put your measurements side by side with the listing: bar and scabbard length, mounting shape, and mounting dimensions. If the listing is unclear about which measurement it uses, or whether your mounting point is within range, send the seller those measurements and ask for a fit confirmation. That small check is more useful than relying on a general claim that a carrier fits all chainsaws.[2]