Best Hand Planer: 5 Electric Picks for DIY and Woodworking

The WEN 6530 is the first pick for most DIYers, with 16 depth stops and a rabbeting guide in a 6-pound tool. Here are four more electric planers for wider boards, cordless work and light trimming.

WEN 6530 6-Amp Electric Hand Planer, 3-1/4-Inch
In this article

The WEN 6530 is the first pick for most DIYers who want a hand planer for trimming doors, edges and boards. It sets cutting depth anywhere from 0 to 1/8 inch in 16 positive stops, so you can take a whisper-thin shaving or a heavier bite without guessing. It comes with a rabbeting guide for cutting step-shaped notches along an edge, and it weighs 6 pounds, which is light enough to hold steady over a long board.

All five picks are electric planers. They spin blades with a motor, which makes them a different tool from the non-powered bench hand planes you push by hand. It also helps to read Best Planer for Home Use: Five Picks and How to Choose.

The other picks cover cordless work on DEWALT batteries, wider stock like 2x4s and 4x4s, and light touch-up jobs where a smaller tool is easier to handle.

As an Amazon Associate we earn from qualifying purchases.

How we picked: from products sold on Amazon for this need, compared by what their makers state and what buyers report in their reviews.

The Picks at a Glance

Product

Best for

Maximum rotational speed

Item dimensions l x w x h

Material type

Buyer rating

WEN 6530

everyday DIY trimming

34000 rpm

—

Aluminum, Plastic

4.5 of 5 (7,996 reviews)

Check price on Amazon

DEWALT DCP580B

cordless DEWALT owners

15000 rpm

13.6″L x 8″W x 8.9″H

Blend

4.7 of 5 (4,646 reviews)

Check price on Amazon

WEN 6534

planing 2x4s and 4x4s

32000 rpm

12″L x 9.75″W x 8.25″H

Metal

4.5 of 5 (2,713 reviews)

Check price on Amazon

WEN 6528

light touch-up work

32000 rpm

9″L x 6.25″W x 6.5″H

Wood

4.5 of 5 (2,278 reviews)

Check price on Amazon

MtiolHig cordless planer

budget DEWALT battery users

15000 rpm

6.5″L x 7.09″W x 12.2″H

Metal, Plastic

4.2 of 5 (288 reviews)

Check price on Amazon

Buyer ratings as shown on Amazon on November 15, 2026; they change.

WEN 6530: Best for everyday DIY trimming

WEN 6530 6-Amp Electric Hand Planer, 3-1/4-Inch

The WEN 6530 is the first pick for homeowners and DIYers who need to trim a sticking door, ease an edge or cut a shallow rabbet. It pairs a 6 amp motor with fine depth control and weighs 6 pounds, so it is easy to handle for small jobs around the house.

The maker lists up to 34,000 cuts per minute from the 6 amp motor. More cuts per minute means the blades take smaller bites, which helps leave a smoother surface on each pass. Depth adjusts from 0 to 1/8 inch in 16 positive stops. Those click stops let you take a whisper-thin pass when fitting a door, then return to the same setting for the next pass without guessing.

With the 5/16 inch rabbeting guide, you can cut rabbets up to 1 inch. That covers jobs like a notch along a shelf edge or a lip on a cabinet back. In the box you get a dust bag, a kickstand, a parallel fence bracket and a 2-year warranty. The kickstand keeps the blades off your bench when you set the planer down, and the dust bag cuts down on shavings scattered across the floor.

Pros

  • Fine depth control with 16 stops

  • Rabbeting guide and fence bracket included

  • Light at 6 pounds for one-handed control

  • Buyers say it is good value and leaves smooth cuts with a sharp blade

Cons

  • Some buyers report a blade shattering, which raises durability concerns if you plane often

  • The 3-1/4 inch cutting width is narrower than the WEN 6534’s 4-3/8 inch, so you need extra passes on wide boards

If you mostly plane full 2x4s and 4x4s, the wider WEN 6534 fits that work better.

Check price on Amazon

DEWALT DCP580B: Best for cordless DEWALT owners

DEWALT 20V MAX Planer, 30,000 Cuts Per Minute, 2 mm Cut Depth, Brushless Motor, Bare Tool Only (DCP580B)

The DEWALT DCP580B is the pick if you already own DEWALT 20V MAX batteries and want a planer with no cord to drag across the job. It runs on 20V DC battery power and has a brushless motor rated at 30,000 cuts per minute. You can carry it to a sticking door or a deck board without hunting for an outlet.

The maker lists a 5/64 inch (2 mm) maximum depth of cut, set with a depth knob calibrated to 1/256 inch. That fine adjustment suits shaving a door edge a hair at a time, where taking off too much leaves a gap. The brushless motor is built for power and runtime, so one battery covers more passes.

The front and back shoes, the flat plates the planer rides on, are precision-machined aluminum to keep the cut parallel. A kickstand lets you set the planer down mid-job without the blades gouging your work. A groove in the front shoe guides the tool along a corner for chamfering, the small angled bevel that softens a sharp edge. A guide fence and a wrench come in the box, and the planer has a 3-year limited warranty.

Pros

  • Cordless, on DEWALT 20V MAX batteries

  • Depth knob calibrated to 1/256 inch for fine passes

  • Kickstand and chamfer groove

  • 3-year limited warranty

Cons

  • It is a bare tool, so you need a battery and charger if you don’t already own them.

  • Its 5/64 inch maximum depth is shallower than the 1/8 inch on the WEN 6530 and 6534, so heavy stock removal takes more passes.

If you have no DEWALT batteries and mostly trim near an outlet, the corded WEN 6530 is a better fit.

Check price on Amazon

WEN 6534: Best for planing 2x4s and 4x4s

WEN 6534 8-Amp Electric Hand Planer, 4-3/8-Inch

The WEN 6534 is the pick if you plane framing lumber, posts or wide boards and want to cover the face in fewer passes. Its 4-3/8 inch cutting width fits 2x4s and 4x4s, and an 8 amp motor drives it at up to 32,000 cuts per minute. That makes it a good fit for flattening deck posts, trimming a door to fit, or cleaning up rough-sawn stock.

The maker lists 16 positive stops that set cutting depth anywhere from 0 to 1/8 inch. In practice you click to a light setting for a smooth finishing pass, then step up for heavier stock removal, without guessing where the knob sits. The two-way dust port throws shavings to the left or right. You can aim the chips away from your body and keep them off the part of the board you have not planed yet, whichever side you work from.

The box includes two fully reversible HSS planer blades, a rabbeting guide, an automatic kickstand, a parallel fence bracket, two V-shaped chamfer grooves, a dust adapter and a two-year warranty. Reversible blades give you a second sharp edge before you need replacements. The kickstand keeps the blades off your bench when you set the tool down between passes, and the chamfer grooves let you knock the sharp corners off a board’s edge.

Pros

  • The 4-3/8 inch width covers a 2×4 or 4×4 face in one pass

  • Buyers say the 8 amp motor is strong and has plenty of power

  • Buyers like the wider cutting width compared with other hand planers

  • A rabbeting guide, kickstand and two-year warranty come in the box

Cons

  • Some buyers report that it cuts very slowly

  • Some buyers report units breaking after only a few hours of use

  • Some owners find it heavy, which matters on long overhead or one-handed jobs

If you mostly trim doors and edges and want a lighter, smaller tool, the WEN 6530 is the better pick.

Check price on Amazon

WEN 6528: Best for light touch-up work

WEN 6528 3.8-Amp Electric Hand Planer, 2-3/8-Inch

The WEN 6528 is the pick for light touch-up work: sanding down a sticking door edge, easing a drawer front or knocking a proud edge flush. It is a small corded planer with a 2-3/8 inch cutting width and a 4.3-pound weight, so it is easy to hold in one hand while you steady the work with the other.

The maker lists a 3.8-amp motor that delivers up to 32,000 cuts per minute. For trimming softwood trim or a door edge, that cut rate leaves a reasonably smooth surface without much extra sanding. Depth adjusts with 9 positive stops from 0 to 1/16 inch. Positive stops click into place, so you can set a very shallow pass, take it, and creep up on a scribed line without guessing.

The 4.3-pound weight makes a difference when you work overhead or on a hung door, where a heavier tool tires your arms fast. An onboard slot holds the blade adjustment wrench, so it stays with the tool instead of getting lost in a drawer when you need to change blades. A kickstand keeps the blades off your workpiece when you set the planer down mid-job, and WEN backs it with a two-year warranty.

Pros

  • Light at 4.3 pounds, comfortable for one-handed and overhead work

  • 9 click stops for fine, repeatable shallow passes

  • Wrench storage on the tool and a kickstand that protects the workpiece

  • Two-year warranty

Cons

  • The 2-3/8 inch width takes more passes to cover a wide board

  • The 1/16 inch maximum depth means many passes to remove a lot of wood

If you plan to flatten 2x4s or 4x4s or take heavier cuts, the WEN 6534 or WEN 6530 fits better.

Check price on Amazon

MtiolHig cordless planer: Best for budget DEWALT battery users

MtiolHig Cordless Planer Compatible with DeWalt 20V Battery,Tool Only

The MtiolHig cordless planer suits you if you already own DEWALT 20V batteries and want a cordless planer for occasional trimming. It runs on those batteries and has a brushless motor, a 3-1/4 inch planing width and up to 0.08 inch (2 mm) of depth per pass.

The maker lists a no-load speed of 15,000 RPM, the same figure as the DEWALT DCP580B. The 3-1/4 inch (82 mm) width covers the edge of a door or the face of a 2×4 in one pass. Depth adjusts from 0 to 2 mm in 0.01 mm steps, so you can take a heavy bite on a sticking door, then shave off a hair for the final fit.

A dual-switch design means the planer runs only when you press the on/off switch and the safety switch together, which helps prevent accidental starts when you set it down or pick it up. The box includes a parallel guide, a blade gauge assembly, a T-handle wrench and a tool holder. With the parallel guide, you get straighter edge passes on boards.

Pros

  • Uses the DEWALT 20V batteries you may already have

  • Buyers say it works well with DEWALT 20V batteries

  • Buyers find it good value for the money and are impressed with the build quality

  • Comes with a parallel guide and a blade gauge

Cons

  • Tool only, so you need your own battery and charger

  • Some buyers report shorter battery life than they would like, so keep a spare battery charged for longer jobs

  • Some buyers report the blades cut poorly

If you have no DEWALT batteries, the corded WEN 6530 is the better fit.

Check price on Amazon

What to look for in an electric hand planer

Start with power: if you already own DEWALT 20V batteries, a cordless planer that runs on them saves you buying into a new system, and a corded planer is the simpler choice if you don’t. The DEWALT DCP580B runs on 20 volts, and the MtiolHig planer is built for DEWALT 20V batteries. Corded models never stop to recharge, which helps on long jobs like fitting a run of doors.

Next, match the cutting width to the boards you plane most. Electric planers here come in 2-3/8 inch, 3-1/4 inch and 4-3/8 inch widths. A 4-3/8 inch planer covers the face of a 2×4 or 4×4 in one pass, while a narrow 2-3/8 inch model suits door edges and trim.

Maximum depth and the number of depth stops tell you how fast and how finely you can cut. A planer with 16 positive stops from 0 to 1/8 inch lets you take heavy passes on rough lumber and still dial in thin shavings for a final fit. Fewer stops, such as 9 from 0 to 1/16 inch, means smaller adjustments overall and more passes to remove the same wood.

Smaller features matter in daily use. A kickstand lets you set the planer down without gouging the work, a rabbeting guide lets you cut stepped edges, and a two-way dust port sends shavings left or right.

These are powered tools. A #4 or #5 bench plane or a block plane is a non-powered hand tool for fine smoothing and fitting [1].

Which planer to pick first

Start with the WEN 6530: it is the first pick for most DIYers because it covers everyday trimming jobs like shaving a sticking door or easing a board edge without costing you a battery system. It runs on a 6 amp corded motor, so you plug it in and keep working as long as the job takes.

Your first decision is corded or cordless, and the batteries already on your shelf should settle it. If you own DEWALT 20V packs, the DEWALT DCP580B runs on that platform, which means no cord to drag around a doorframe or deck. If you have no batteries, a corded model saves you buying a pack and charger just to plane.

Sources

  1. Woodworking Hand Planes for the Beginner Explained