The DeWalt DW734 usually sells for about $549, and you can sometimes get it for around $399 on sale. Its list price is $579, so the best price on a DW734 depends on when and where you shop. [1] [2] In February 2026, one deal had it at $399, which was 27% off the $549 regular price, a savings of $150. [2] Some stores list it much higher, from $599 up to $695.79. [3] [4] Learn more in DeWalt DWE7480 Table Saw Review: Is It a Good Fit?
That spread matters because this is the same tool everywhere: a 15 amp, 12-1/2 inch benchtop planer with a three-knife cutter head. [5] Paying the top price gets you no extra planer. Below, you’ll see why prices swing, what each budget buys and what it costs to run the planer once it’s home. You’ll also find how to time your purchase for a better deal.
What makes the DW734 price swing between stores
The DW734 sells for very different amounts depending on whether a store is running a sale, what kind of seller it is and whether the unit is new.
Where you see it | Price shown | What it tells you |
|---|---|---|
Woodworking deal listing on sale | $399 (regular $549) | A sale drops the price by $150 [2] |
Price comparison across 6 stores | $599 lowest | Without a sale, most stores sit near or above list [3] |
Smaller online retailer | $695.79 | Some sellers price well above the rest [4] |
eBay open-box and used | Varies by listing | Can be cheaper, but condition and contents differ [6] |
Why the list price is your reference point
A price tracker such as camelcamelcamel records the DW734’s list price at $579. [1]
Open-box and used listings
eBay carries open-box DW734 listings alongside used planers, and some show prices like $20.99 or $26.99 with free shipping. [6] Prices that low point to accessories or parts listed under the planer’s name, so read each listing’s title and photos to see what you are actually getting.
What you get at different budgets
Your budget decides how you buy the DW734 more than what you get, because the planer itself is the same machine at every price. The real choice is between waiting for a sale, paying full price now, or taking a chance on a secondhand unit.
New on sale, around $399
This is the sweet spot if you can wait. One deal took the planer from a $549 regular price down to $399 [2].
Sales like this come and go, so this budget works best when your project is a few weeks out. If you’re planing boards for a table you’ll start next month, set a price alert and hold off.
New at full price, $549 to $599
At this level you’re paying for speed and convenience. The cheapest offer across six stores in one comparison was $599 [3]. Expect to land somewhere in this range when no sale is running.
Paying full price makes sense when the planer is holding up a job.
Open-box or used units
Secondhand listings can look like steals, but read them closely. Some eBay listings tied to the DW734 show prices like $20.99 or $26.99 [6]. A real 12-1/2 inch planer doesn’t sell for that, so those are almost certainly parts or accessories.
Before you bid, look at the photos and description for the full machine: motor housing, cutter head, infeed and outfeed tables. If the listing only shows a small part in a bag, it isn’t the planer.
What every DW734 includes
The performance doesn’t change with the price tag. Every unit has a 15 amp, 20,000 rpm motor built to handle deeper cuts in hardwoods [5]. Its three-knife cutter head gives 96 cuts per inch [5]. More cuts per inch means a smoother surface straight off the machine, so you spend less time sanding oak or maple afterward.
Costs beyond the sticker price
Plan on spending money beyond the planer itself. The price on the listing covers the tool only, and a few add-ons can raise your real cost before you plane your first board.
Shipping on marketplace listings
Shipping is the first cost to look for when you buy from a marketplace seller. Some eBay listings for DeWalt planers and planer items include free shipping. [6] Others leave it as a separate charge.
A benchtop planer is heavy and bulky, so a separate shipping charge on the full tool can cancel out a low asking price. Add the shipping to the listing price, then compare that total against other sellers.
Replacement knives over time
Knives are an ongoing cost. The DW734 uses three knives. They dull with use, and they dull faster if you run boards with hidden grit, glue lines or old finish through the planer.
Plan to replace the set from time to time. You can stretch their life by brushing boards clean and pulling any staples or nails before planing. If you buy a used planer, count on the knives being dull and budget for a fresh set.
Dust collection and a stand or bench
A thickness planer throws off a large volume of chips. Without dust collection, a few passes on an 8-foot board can bury the floor and clog the outfeed. A shop vacuum or a dust collector hooked to the planer’s chip port keeps the cutterhead clear and your shop cleaner.
The DW734 is a benchtop tool, so it needs a solid surface at a comfortable working height. If your bench is already full, add the cost of a stand or a sturdy cart. Room for long boards to enter and leave the planer is part of that setup.
Cheap eBay listings may be parts
A very low eBay price is often for a part, not the planer. DeWalt planer items on eBay are listed at prices such as US $20.99, US $26.99 and US $54.99. [6] At those prices you are almost certainly looking at knives, a dust hood or another accessory.
Read the title and the photos carefully before you buy. If the listing doesn’t clearly show the whole 12-1/2 inch planer, assume it’s a part.
How to get the best deal on a DW734
The best way to save on a DW734 is to set a target price, watch the listings until one hits it, and buy from a store you trust. A little patience usually pays more than hunting for a hidden coupon.
Track the Amazon price over time
A price tracker such as camelcamelcamel shows how the DW734’s Amazon price has moved, measured against its $579 list price [1]. If today’s price sits near that list figure, you know you are paying close to the top of the range and can afford to wait.
Most trackers also let you set an alert. Pick a number you would be happy to pay, enter it, and let the tracker email you when the price drops. That way you skip checking the listing every day.
Watch for sale events
The DW734 does go on sale, and the discounts can be large. One deal knocked 27% off, taking it from $549 to $399 [2].
Tool deal sites and woodworking blogs often post these drops as they happen. Following one or two of them is an easy way to catch a sale without tracking every store yourself.
Compare big-box and tool-store listings
Check more than one retailer before you buy. Home Depot sells the DW734 as the 15 Amp Corded 12.5 in. Bench Planer [7], and Acme Tools lists it as the Heavy-Duty 12-1/2 In. Thickness Planer [8]. The names differ, so search by the model number, DW734, to make sure you are comparing the same tool.
Look at the total cost, including shipping and any store pickup option. A slightly higher price with free in-store pickup can beat a lower price that adds a delivery fee.
Read the reviews before you commit
Reviews tell you whether a deal is worth taking. At Home Depot, the DW734 holds a 4.3 rating from 439 ratings [7]. With that many buyers weighing in, the score reflects real long-term use rather than a handful of early opinions.
Skim the low-star reviews for repeated complaints, such as snipe or shipping damage. If the same problem shows up again and again, factor it into how much you are willing to pay.
Common questions about buying the DW734
Is the DW734 worth it for a hobbyist?
Yes, if you plane hardwood often enough that buying rough or skip-planed lumber saves you money. The DW734 is designed to handle large, deep cuts in hardwoods [7]. Its 15 amp, 20,000 rpm motor is built for bigger passes in hardwoods [5].
In practice, that means you can take rough-sawn oak or maple boards down to a consistent thickness without the motor bogging on every pass. If you only plane a few pine boards a year, a planer of any kind may sit unused, and buying lumber already surfaced is cheaper.
A good test is to count the board feet you buy in a typical year and price the difference between rough and surfaced stock at your local lumberyard. If that gap adds up over a year or two, the planer starts paying for itself.
Is the DW734 safety listed?
Yes. The DW734 is UL and CSA listed [7]. UL and CSA are independent testing organizations that check electrical tools against recognized safety standards in the U.S. and Canada.
The listing covers how the tool is built. It does not replace safe habits at the machine. Feed boards that are long enough for the rollers to grip, and keep your hands clear of the infeed and outfeed openings.
Is an open-box DW734 safe to buy?
It can be, as long as you read the listing closely. Open-box DW734 planers do show up on eBay [6]. Some listings in the same category are priced at $20.99 to $54.99 [6]. A price that low almost always means a part or accessory, not a working planer.
Before you pay, look for these details in the listing:
Photos of the whole planer, including the cutterhead and the infeed and outfeed tables
The seller’s return policy, so you can send it back if the motor or rollers have problems
A clear statement of what’s included, such as knives and any dust hood
If a listing has only one blurry photo and no return option, skip it. A full-price new unit with a warranty is a safer buy than a mystery box.
Is the DW734 worth buying now?
Yes, the DW734 is worth buying when you can get it well below its regular price. Its regular price is $549, and it has sold for $399 on sale [2].
If your boards can sit for a few weeks, waiting usually costs you nothing. Before you order, look at the current listings from a few retailers and compare them with the $579 list price [1]. A listing at or above that figure is a sign to keep shopping.
