The Festool Pro 5 LTD is a limited edition sander that Festool sold with a systainer, and today a used unit is about the only way to get one. [1] It sold for just $99, which made it an unusually cheap way into Festool’s lineup, but it isn’t available anymore. [2]
That matters if you’ve spotted a Pro 5 LTD listing and want to know whether it’s a bargain or a headache. A used unit can save you money, but what comes in the box varies. One listing, for example, includes the power cord and sandpaper but no dust collector. [1]
Below you’ll find what kind of sander the Pro 5 LTD is, how well it sands, where it falls short, and how it stacks up against other Festool 5-inch sanders. You’ll also see who it suits and when another model makes more sense.
What kind of sander is the Pro 5 LTD?
The Pro 5 LTD is a 5-inch random orbital sander, the kind of handheld sander most DIYers reach for when they need to smooth flat boards, tabletops or cabinet panels. Festool sold it as a random orbital sander under its PRO line [2]. In some listings it also appears as an “eccentric sander,” which is Festool’s term for the same type of tool [1].
What “random orbit” means
A random orbital sander does two things at once. The round pad spins, and it also wobbles in a small offset circle, called the orbit. Because those two motions combine, no single bit of grit follows the same path twice, so you don’t get the repeating swirl marks a plain spinning disc would leave.
The size of that wobble matters. A bigger orbit removes wood faster, while a smaller one leaves a smoother surface. Think of it this way: you’d use a larger orbit to flatten a glued-up panel, then a smaller one before you brush on finish.
Why it’s called “LTD”
LTD stands for limited edition. The Pro 5 LTD was sold as a limited-edition sander packaged with a systainer [1]. A systainer is Festool’s stackable plastic storage case, so the sander came with its own box for storage and transport.
In practice, that means you’re looking at a specific bundle rather than a regular catalog model. If you picture a standard Festool 5-inch sander in a case, built and sold as a special run, you have the right idea.
What you hold in your hand
The tool itself is a corded sander with a 5-inch pad. One seller’s unit came with its power cord and the sandpaper originally included with the tool [1]. You attach hook-and-loop discs to the pad, plug it in, and sand with the pad flat on the work.
How well does it sand?
The Pro 5 LTD sands smoothly and leaves a finish you’d expect from a higher-priced Festool. Owners mostly praise how it feels in the hand and the surface it leaves behind.
Balance and stroke
The sander is well balanced and has a tight stroke. [3] Good balance means the pad sits flat on the work without you leaning on one side to keep it level. That makes it easier to avoid dished spots or swirl marks along the edge of a board.
A tight stroke keeps the pad’s motion compact and controlled. On a tabletop or cabinet door, the sander tracks where you guide it and doesn’t wander or skate. One owner also reports a powerful motor and believes it is brushless. [3]
Less vibration in your hands
The Pro 5 LTD has noticeably less vibration than many other sanders. [3] In practice, your hands and wrists tire more slowly. You notice it most on long jobs, like taking a dresser down to bare wood or sanding a stack of shelf boards in one afternoon.
Lower vibration also helps your control. When the tool isn’t buzzing in your grip, you can hold a light, even pressure, and that pressure does more for an even scratch pattern than pushing down hard.
Finish quality
The surface it leaves is what you would expect from a Festool finish sander. [4] One reviewer called the result “perfect” and counted the tool’s comfort as another ergonomic plus. [4]
This matters because the last few passes decide how stain and clear coats look. If the sander leaves a uniform surface, you spend less time hunting down stray scratches under a raking light before you finish.
What are its limits?
The biggest limit is availability: the Pro 5 LTD isn’t sold new anymore, so every unit you find today is secondhand. [2] That changes how you shop. You’re buying someone else’s tool, with whatever wear, missing parts and extras it happens to have.
No new units, no factory-fresh kit
Because the model is discontinued, you can’t order a boxed one with everything in place. [2] Each listing is its own bundle. One seller might include the original systainer and spare paper, while another offers the bare sander with a worn pad.
This also means you can’t fall back on a retailer if something is missing. Treat the listing description and photos as the full story of what arrives at your door.
Dust collection may be missing
Some used units come without a dust collector. [1] For example, one listing included the power cord and a selection of sandpaper but no dust collector. [1] Without collection, fine dust settles on your work and in the air, which matters most when you sand between finish coats.
If a listing lacks one, plan to connect the sander to a shop vacuum or dust extractor that fits its port, or budget for a replacement collector. Factor that cost into what you’re willing to pay.
Look closely at the cord, pad and accessories
Wear shows up in a few places on a used sander:
The power cord, which should have no cuts, kinks or exposed wire near the plug or tool body
The sanding pad, whose hook face grips paper poorly once it’s worn smooth or torn at the edges
The systainer, since the limited edition was sold as a sander and systainer set [1]
Included sandpaper, which can save you a first purchase of discs
Ask the seller for close-up photos of the pad face and cord if the listing doesn’t show them. A sander with a fresh pad and a complete case is worth more than one that needs parts right away.
How does it compare with the ETS 125 and other Festool 5-inch sanders?
Orbit size matters as much as price. The orbit is the diameter of the small circle the pad swings through as it spins. A bigger orbit removes material faster and leaves coarser scratches, and a smaller orbit cuts slower but leaves a smoother surface.
Sander | Price when compared | Orbit | Best use |
|---|---|---|---|
EC 5-inch | Not listed | 3mm [5] | General sanding, finer than a 5mm orbit |
2mm orbit sander | Not listed | 2mm [5] | Final sanding and sanding between coats |
The EC 5-inch sander has a 3mm orbit, which is finer than a 5mm orbit. [5] On a tabletop, that gives you fewer visible swirl marks after your last grit than an aggressive 5mm machine would leave.
A 3mm orbit still falls short of a 2mm orbit, which is the size suited to final sanding and to sanding between coats of finish. [5] If you plan to scuff-sand lacquer or polyurethane between coats on cabinet doors, a 2mm machine is the better match for that job.
To sum up, the Pro 5 LTD wins on price and the ETS 125 REQ costs about twice as much. The EC 5-inch and 2mm orbit sanders give you a finer scratch pattern for finishing work, and the 2mm orbit is the one built for between-coat sanding.
Who should buy a Pro 5 LTD today?
The Pro 5 LTD makes the most sense for a hobbyist or homeowner who wants Festool build quality without paying full Festool prices. If you sand furniture projects, cabinet doors or shop builds on weekends, a used Pro 5 LTD gets you a Festool-made random orbital sander for far less than the brand’s regular lineup usually costs.
Weekend woodworkers and first-time Festool buyers
It was Festool’s entry point. The sander sold for just $99 when it was available [2]. That price put it within reach of people who had never owned a Festool tool, and used units still tend to attract that same buyer.
This is a good match if you:
Sand mostly bare wood before finishing, such as a pine bookshelf or an oak tabletop
Want a 5-inch sander for general shop work rather than a dedicated finishing tool
Are curious whether Festool’s sanders feel different enough to justify the brand
Finishers who want a finer orbit
If your main job is the last pass before finish, or scuff-sanding between coats of lacquer or varnish, another model may suit you better. Orbit size matters here: a smaller orbit leaves finer scratches. A 2mm orbit is the one suited to final sanding or sanding between coats, and Festool’s EC 5-inch sander uses a 3mm orbit, which is finer than 5mm but still not that 2mm stroke [5].
For example, if you spray several coats on a set of cabinet doors and sand between each one, a fine-orbit finish sander will leave fewer visible swirl marks under the next coat. The Pro 5 LTD fits better earlier in the process, when you are smoothing raw boards.
Buying used
Because new units are gone, you will be shopping secondhand. Asking prices vary a lot between sellers, so compare several current listings and weigh each one against what a new Festool sander would cost before you commit.
Common questions about the Pro 5 LTD
Can you still buy a new Pro 5 LTD?
No. The Pro 5 LTD is no longer available new, so a used or secondhand unit is your only route to one [2]. Owners noticed it disappearing years ago and asked in user forums where it went [4].
If you find one listed as “new,” treat it as old stock and ask the seller how it was stored. A sander that sat in its case for years can still be fine, but you want to know what you are paying for.
Does it come with dust collection?
Not always. Some used units are sold without the dust collector, and one listing included only the power cord and some sandpaper that came with the sander [1]. That listing also described it as a limited edition sander sold with its systainer, Festool’s stackable storage case [1].
A missing dust collector changes the deal. Without it, you either sand with dust going into the air or you buy a hose setup or extractor separately. That makes a cheap bare sander less of a bargain than it first looks. Ask the seller for a photo of everything in the box before you commit.
Is the Pro 5 LTD a “must-have”?
Owners tend to like it a lot. One owner who reviewed it called the finish quality exactly what you would expect from a Festool finish sander and described it as perfect [4]. Festool owners have also debated in forum threads whether the Pro 5 counts as a “must have” [4].
Those opinions come from people who already chose Festool, so read them as enthusiasm from fans. For a hobbyist doing furniture, cabinet doors or trim, a well-kept unit at a fair price is a pleasant sander to own. If you already have a good 5-inch random orbit sander, it is a nice upgrade you can skip.
Is the Pro 5 LTD worth tracking down?
Yes, a Pro 5 LTD is worth buying used when the listing is complete and the price reflects its budget origins. It was a $99 sander and is no longer made, so a used one only makes sense if it costs well below a current Festool and still has its pad, cord and dust port in good shape. [2]
If you can’t find a complete unit at a fair price, move to a model you can buy new. The ETS 125 REQ ran about $195 by comparison, which gets you a current 5-inch Festool with full support. [2] The EC 5-inch uses a 3mm orbit, which suits general sanding well. For final passes between coats, look for a finer 2mm orbit instead. [5]