The HART 20V rotary tool HPRL01 is worth it if you already own HART 20V batteries and want a cordless tool for small-scale cutting, sanding and grinding [1]. If you are starting from scratch, keep in mind that many listings sell it as a tool only, with no battery or charger [2].
That matters because the battery decides whether this is a bargain or a new platform purchase. You might want to trim a plastic part in the driveway or buff a rusty hinge in the garage, away from an outlet. A cordless tool you can power with batteries you already have is the easy choice for those jobs.
Below you’ll find what the tool does well, what’s in the kit, whether your Dremel bits will fit, and how it compares with a Dremel kit.
What the HPRL01 offers in speed and features
The HPRL01 gives you a variable speed dial that runs from 0 to 33,000 RPM, so one tool covers everything from gentle polishing to fast cutting. [3] That range is what makes a rotary tool useful: the right speed depends on the material and the accessory, not on how much power you want.
How the speed dial works
You set the speed with a dial on the tool body instead of choosing from a few fixed settings. [3] That lets you start low, test the cut or finish on a scrap piece, and turn it up a little at a time until the accessory works cleanly.
The top end of 33,000 RPM matches what you’ll see on many corded and cordless rotary tools sold for hobby and DIY work. [4] It’s plenty for small cutoff wheels and grinding stones.
Picking a speed for the job
Lower speeds suit soft materials and finishing work. Plastic melts and gums up a bit when the accessory spins too fast, so a slow setting gives you a cleaner edge. Buffing and polishing also go better slow, because high speed heats the surface and can smear compound or burn a finish.
Higher speeds suit cutting and grinding. A cutoff wheel slicing through a thin bolt or a grinding stone dressing a mower blade works faster and with less chatter near the top of the dial.
A few starting points:
Low speed for trimming plastic parts or polishing metal with a felt wheel
Low to medium speed for sanding wood with a drum
High speed for cutting with abrasive wheels or grinding steel
Power source
The HPRL01 runs on batteries from the HART 20V system, the same packs used across HART’s cordless lineup. [3] Battery power means you can take the tool to the job, such as a fence post, a car in the driveway, or a workbench with no outlet nearby. [1]

What comes in the 33-accessory kit
The kit gives you the tool plus 33 accessories for sanding, buffing and cutting, packed in a storage case. [3] That covers most starter jobs on day one, so you can smooth a rough edge, polish a tarnished hinge or nick through a thin dowel without buying extra bits first.
The 33 accessories
The bundled pieces fall into three job groups: sanding, buffing and cutting. [3] In practice, that means you can work through a typical small project in stages. You might cut a notch in a plastic part, sand the edge flush, then buff it smooth, all with what came in the box.
A starter set like this is best for trying out different tasks. Once you find the jobs you do most, you will likely wear out a few favorite bits faster than the rest and replace those individually.
Storage case and collet wrench
The kit includes a case that holds the tool and its bits. [4] A case matters more than it sounds: small sanding drums and cutting wheels are easy to lose in a drawer, and keeping them sorted saves time hunting for the right one mid-project.
You also get a collet wrench. [4] The collet is the small sleeve at the nose of the tool that clamps around a bit’s shaft, and the wrench lets you loosen and tighten it when you swap accessories. Keep the wrench in the case so it is there when you need it.
The battery is not in the box
Tool-only listings ship with no battery or charger. [2] Retail listings for the 33-accessory kit state “Battery Not Included” in the product name. [5] If you already own a HART 20V battery and charger, you can use the tool right away. If not, plan on buying them separately before your first project.
Which jobs it handles well, and where it falls short
The HPRL01 is at its best on small, detailed work: sanding a tight curve, buffing a tarnished part, nicking a small cut or knocking a burr off metal. HART pitches it for precision sanding, buffing and cutting [5], and it also covers small-scale grinding jobs [1].
Jobs that suit it
Think of it as a handheld detail tool. Good examples:
Smoothing the inside edge of a scroll-cut ornament with a sanding drum
Buffing a rusty hinge or a brass knob back to a shine
Cutting a plastic tube, a thin rod or a stuck screw
Grinding a burr off a freshly cut bolt or sharpening a garden tool edge lightly
These are jobs where control matters more than power, and a small bit lets you reach spots a sander or grinder can’t.
Portability away from an outlet
The tool runs on battery power, which makes it portable for small-scale cutting, sanding and grinding [1]. You can trim a stuck fence latch out in the yard, touch up a deck railing or work inside a car without dragging an extension cord along. No cord also means nothing snagging around a tabletop project.
Where it falls short
A rotary tool is no substitute for a saw. Ripping a 2×4, cutting plywood sheets or slicing through a thick pipe would take forever with small cutoff wheels and burn through accessories. For anything longer than a few inches or thicker than thin stock, reach for a circular saw, jigsaw or hacksaw instead.
Safety basics
Small wheels spin fast and can shatter, so wear eye protection every time, even for a quick cut. Clamp the workpiece or hold it in a vise so both hands stay on the tool. Match each accessory to the speed: never run a bit or disc faster than its rated maximum, and use lower settings for plastics and polishing so you don’t melt or scorch the surface.
Will your Dremel bits fit it
Many Dremel bits will likely work in the HPRL01, but you should confirm fit bit by bit before you count on your existing collection. The tool takes bits through a collet, a small sleeve that clamps the bit’s shank (the smooth metal stem), and it comes with a collet wrench for tightening and loosening it [4].
Match the shank to the collet
Start with the shank diameter, because that decides whether a bit can be clamped at all. Measure the stem of a bit you already own, or read the size printed on its package, and compare it with the collet size listed for the HPRL01 in its manual or on the box.
A bit with a shank too thick won’t slide in. A bit with a shank too thin won’t grip, and it can wobble or slip under load. If you keep bits with mixed shank sizes, sort them into two groups so you know which ones to set aside.
Check each accessory’s speed rating
The HPRL01 runs from 0 to 33,000 RPM [4]. That means every bit, disc or wheel you mount needs a maximum rated speed you can stay under. Most accessories print this rating on the packaging, and some print it on the part itself.
For example, if a cutoff wheel lists a lower maximum than the tool’s top speed, keep the dial below that number whenever that wheel is mounted. Loose bits sold without packaging often have no rating, so treat them with extra caution or leave them out.
Attachments are a different story
Bits and attachments are separate questions. Bits go into the collet. Attachments such as cutting guides, angle heads or flex shafts are made to mount on one brand’s housing. A Dremel attachment built for Dremel’s nose threads may not mount on a HART tool, so plan to use HART’s own versions or skip those add-ons.
HART HPRL01 vs a Dremel kit
Pick the HART HPRL01 if you want a cordless rotary tool for light jobs and already have HART 20V batteries. Pick a Dremel kit if you plan to grow into specialty attachments such as guides and holders. The HART covers everyday sanding, buffing and cutting with its included bits, while Dremel’s system has a wider range of add-on attachments to build on over time.
Criterion | HART HPRL01 | Dremel kit |
|---|---|---|
Power | Cordless, HART 20V battery | Varies by model (corded and cordless) |
Speed range | 0 to 33,000 RPM variable dial [4] | Varies by model |
Accessories in the box | 33 sanding, buffing and cutting accessories with storage case [3] | Varies by kit |
Room to expand | Limited to bits and accessories | Wide range of brand attachments |
Battery needed | Yes, if bought tool only | Depends on model |
What the battery adds if you are new to HART
The tool-only price is lower than the real cost of getting started when you don’t own HART batteries. One retailer lists the 33-accessory kit at $104.00 as tool only, with no battery or charger [2]. A secondhand HPRL01 has sold for $45.00 [3]. In both cases you still need a HART 20V battery and charger, which can raise the total enough that a Dremel kit with its own power source costs about the same.
That extra cost is worth paying if you plan to buy more HART 20V tools, since the same battery runs them all. If this would be your only HART tool, compare the full bundle price with a Dremel kit before you decide.
Another cordless option
If you already own Ryobi 18V batteries, the Ryobi 18V rotary tool station is another cordless choice that works the same way: you buy into one battery platform and use it across several tools.
In short, the HART suits light cordless work for people who already have HART batteries. Dremel suits makers who want the most attachments, and the Ryobi station makes sense if your batteries are Ryobi.
What to check on price and listings
Before you pay, make sure the listing tells you exactly what’s in the box, that it’s the right model, and that the price fits what you’re getting. Prices for this tool swing widely between sellers, so a few minutes of comparing can save you real money.
Battery and charger
Read the listing title and description for the words “tool only.” One retailer lists the HART 20-Volt Cordless Rotary Tool with 33 Accessories Kit as “Tool only No battery or charger,” with a separate option that includes a battery and charger. [2] If you don’t already own a HART 20V battery, pick the bundled option or add the cost of a battery and charger to the price before comparing deals.
Photos can mislead here. A picture of a case full of bits doesn’t mean a battery is inside, so go by the written description.
Model number
Look for HPRL01 printed in the listing. Secondhand listings often name it outright, such as one that describes a HART 20V cordless rotary tool with collet wrench, bits, accessories and case as “Model number HPRL01.” [4] If a seller doesn’t give the model number, ask for a photo of the label on the tool body before you buy.
New vs. secondhand prices
The spread between sellers is large. One retail listing shows the kit at $104.00 each, with orders starting at $399. [2] A Mercari listing for an HPRL01 marked new shows $45.00 plus $1.94. [3] That’s less than half the retail figure, which makes resale sites worth a look if you’re on a budget.
The trade-off is what you give up buying used or from a private seller: you may get no return window and a kit with missing bits. Count the accessories in the photos against the 33 the kit should have, and check current listings yourself since these prices change often.
Should you buy the HPRL01
The HPRL01 makes the most sense if you already have HART 20V batteries and your projects are small: touching up a carved sign, buffing a tarnished hinge, or trimming a plastic part. It is a battery-powered tool built to make small-scale cutting, sanding and grinding portable. [1] If you’d rather have a big lineup of attachments, such as guides, flex shafts and specialty heads, a Dremel kit is the better pick.
Before you order, look at the batteries on your shelf and the bits in your drawer. Make sure you have a HART 20V pack to run the tool, and measure the shanks of the accessories you plan to reuse so you know they’ll seat in the collet.