Power Tool Combo Kits Worth Buying: 5 Cordless Picks

Five cordless power tool combo kits from DEWALT, CRAFTSMAN and RYOBI, from a compact drill and impact driver pair to a 10-tool set, with who each one suits.

DEWALT 20V MAX Cordless Drill and Impact Driver (DCK240C2)
In this article

The DEWALT DCK240C2 is the first pick among power tool combo kits if most of your work is drilling holes and driving screws, especially in cramped spots like cabinets and between joists. Both tools are compact and built to reach difficult spaces, so you can work where a bulkier drill would hit the wall first.

A drill and an impact driver cover most home projects, from hanging shelves to building a deck frame. The DCK240C2’s impact driver delivers up to 1,400 in-lbs of torque, which is enough to sink long screws and lag bolts without the drill straining. If you plan to remodel or take on woodworking, larger kits add a circular saw, a reciprocating saw and an oscillating tool so you can make cuts with the same batteries. The picks below run from the two-tool kit up to a 10-tool set. Related reading: Makita GRH10 Price: Tool Only vs Kit.

As an Amazon Associate we earn from qualifying purchases.

How we picked: from products sold on Amazon for this need, compared by what their makers state and what buyers report in their reviews.

The Picks at a Glance

Product

Best for

Battery type

Power source

Battery cell composition

Buyer rating

DEWALT DCK240C2

drilling and driving

Lithium Ion

Battery Powered

—

4.7 of 5 (61,442 reviews)

Check price on Amazon

DEWALT DCK1021D2

a full home workshop

Lithium Ion

Battery Powered

Lithium Ion

4.6 of 5 (249 reviews)

Check price on Amazon

DEWALT DCK540D1

remodeling and framing cuts

Other Than Listed

Battery Powered

Other Than Listed

4.7 of 5 (1,102 reviews)

Check price on Amazon

CRAFTSMAN CMCK700D2

a broad starter set

Lithium Ion

Battery Powered

Lithium Ion

4.6 of 5 (1,441 reviews)

Check price on Amazon

RYOBI P1819

growing a tool collection

Lithium Ion

battery

Lithium Ion

4.7 of 5 (2,080 reviews)

Check price on Amazon

Buyer ratings as shown on Amazon on November 16, 2026; they change.

DEWALT DCK240C2: Best for drilling and driving

DEWALT 20V MAX Cordless Drill and Impact Driver (DCK240C2)

The DCK240C2 is the pick if most of your projects come down to drilling holes and driving screws: hanging shelves, assembling furniture, building a deck railing. It pairs a drill/driver with an impact driver, both built compact so they reach into tight spots. The kit includes two 20V batteries, a charger and a contractor bag.

The maker lists a drill motor that delivers up to 300 UWO and an impact driver with up to 1,400 in-lbs of torque. UWO (unit watts out) is DEWALT’s measure of drill output. In practice, you drill pilot holes and bore through studs with the drill, and you sink long lag screws or deck screws with the impact driver, which keeps you from stripping heads or straining your wrist.

Both tools have built-in LED work lights that stay on for 20 seconds after you let go of the trigger. That helps when you’re working inside a cabinet or under a sink, since the light holds while you line up the next screw. The impact driver’s 1/4 in. hex chuck takes 1 in. bit tips with one hand, so you can hold the workpiece or a ladder rail with the other.

Pros

  • Compact tools that fit into hard-to-reach spaces

  • Two batteries, so one can charge while you use the other

  • Buyers say the set feels well made and has plenty of power for household projects

  • Buyers report the batteries hold up well and last a long time

Cons

  • Some buyers report batteries that stop holding a charge after a while

  • Buyers mention the drill’s chuck can loosen during use, so you may need to retighten it on longer jobs

  • No saws are included, so cutting lumber or trim means buying other tools

If your projects include cutting, the DEWALT DCK540D1 or the DCK1021D2 adds saws to the drill and driver.

Check price on Amazon

DEWALT DCK1021D2: Best for a full home workshop

DEWALT 20V MAX Power Tool Combo Kit, 10 Tool Cordless Power Tool Set, 2 Batteries, Charger and 2 Bags Included, Dewalt Brushless Combo Kit (DCK1021D2)

The DCK1021D2 is the pick if you want one box that equips a whole home workshop. It is a 10-tool cordless set that comes with 2 lithium-ion batteries, a charger and 2 bags. That means you can handle drilling, driving and cutting jobs around the house without buying tools one at a time.

The DCS381 reciprocating saw has a keyless blade clamp, so you can change blades without touching the blade or the reciprocating shaft. In practice, that makes it quick to switch from a wood blade to a metal blade halfway through a demolition job, with no hex key to hunt for. The kit also includes the DCL040 LED work light, which you can hook up in your workspace for better visibility and hands-free use.

The drill and impact driver are brushless models, the DCD777 and the DCF787. The maker lists a compact 7.6 in. front-to-back size and a variable speed trigger. The short body fits between joists or inside cabinets, and the trigger lets you start screws slowly in soft trim.

The set also includes a wireless Bluetooth speaker that runs on DEWALT 12V/20V MAX battery packs. Its vacuum has dual cleanup modes, so you can use the front utility nozzle or the extendable rubber hose.

Pros

  • Ten tools share one 20V battery platform

  • Two batteries let you charge one while you use the other

  • Blades change on the reciprocating saw without tools

  • Buyers say the tools feel well made and the kit is good value for what it costs

Cons

  • Buyers complain that the batteries run down quickly, which matters on longer cutting jobs

  • It is a large set, more than a light DIYer may ever use

If you mostly hang shelves and assemble furniture, the DEWALT DCK240C2 drill and impact driver kit is a better fit.

Check price on Amazon

DEWALT DCK540D1: Best for remodeling and framing cuts

DEWALT 20V MAX 5-Tool Power Tools Combo Kit, Includes 1/2 Cordless Drill,1/4 Impact Driver, Reciprocating Saw, Circular Saw, Oscillating Tool, 5Ah Battery and Charger (DCK540D1)

The DCK540D1 is the kit for remodelers and anyone framing or cutting into walls: it pairs a drill and impact driver with a reciprocating saw, a circular saw and an oscillating tool. The circular saw and the compact reciprocating saw are what set it apart for demolition and framing cuts.

The maker lists a 1/2 in. drill driver with a brushless motor rated at 340 unit watts out. That gives you more drilling muscle for jobs like boring holes through studs for wiring. The 1/4 in. impact driver delivers 1,500 in-lbs of torque in a compact, lightweight body, so you can sink long deck or framing screws without straining your wrist.

The reciprocating saw is compact and built to fit between studs and into other tight areas. That helps when you are cutting out old drywall or trimming a pipe inside an open wall. The circular saw uses a 6-1/2 in. carbide blade and cuts a 2×4 at a 45-degree angle in a single pass, so bevel cuts on framing lumber take one stroke instead of two. The oscillating tool has a 3-speed selector, letting you slow down for delicate cuts or speed up for faster work.

Pros

  • Two saws suited to framing and demolition cuts

  • 3-year limited warranty on the cordless tools

  • Buyers say the battery lasts a good while on a charge

  • Buyers find the tools comfortable to hold and say the set covers many jobs

Cons

  • The kit comes with one battery, while the DCK240C2 and the other picks include two, so you wait while it charges.

  • Buyers complain the included battery is too small for these tools.

  • Some buyers report tools wearing out or failing sooner than expected.

If you mainly drill and drive screws and need no saws, the DCK240C2 fits better.

Check price on Amazon

CRAFTSMAN CMCK700D2: Best for a broad starter set

CRAFTSMAN V20 Power Tool Combo Kit, 7-Tool Cordless Power Tool Set with 2 Batteries and Charger (CMCK700D2)

The CRAFTSMAN CMCK700D2 is the pick if you want one box that covers drilling, driving, cutting and grinding on day one. It includes seven tools, two batteries, a charger and accessories. That makes it a good fit for a new homeowner or hobbyist who would rather not buy tools one at a time.

The maker rates the 1/2 inch drill at 280 UWO (units watts out, a measure of power output) with a 2-speed gearbox: 0 to 400 RPM and 0 to 1,500 RPM. Use the low range for driving screws or boring large holes without the bit grabbing, and the high range for quick, small holes in wood or drywall. The 1/4 inch impact driver delivers 1,460 in-lbs of torque. That is enough to sink long deck screws or lag bolts without pre-drilling every hole.

The reciprocating saw has a 1 in. stroke at 3,000 SPM, with tool-free blade release. The short stroke suits demolition and cutting pipe or old framing, and you can swap blades without hunting for a wrench. The rest of the kit adds a 6-1/2 inch circular saw for ripping or crosscutting 2x lumber, an oscillating tool, a 4-1/2 inch grinder and a 140-lumen LED task light. With two batteries in the box, one can charge while you work with the other.

Pros

  • Seven tools cover cutting, sanding, grinding and fastening

  • Two-speed drill handles both slow driving and fast drilling

  • Buyers say the set has a wide, useful mix of tools and is worth what it costs

  • Buyers also rate the overall tool quality as good

Cons

  • Buyers report battery charging problems and short battery life

  • Buyers say the tools are not sturdy enough for heavier jobs, which matters if you plan regular framing or demolition

  • The drill’s 280 UWO is less output than the DEWALT DCK540D1 drill offers

If most of your work is remodeling and framing cuts, the DEWALT DCK540D1 is the better match.

Check price on Amazon

RYOBI P1819: Best for growing a tool collection

RYOBI P1819 18V One+ Lithium Ion Combo Kit (6 Tools: Drill/Driver, Impact Driver, Reciprocating Saw, Circular Saw, Multi-Tool, LED Worklight, 4.0 Ah & 1.5 Ah Battery, Charger, Bag)

The RYOBI P1819 is for buyers who want a starter set today and plan to add more tools over time. It includes six tools: a drill/driver, impact driver, reciprocating saw, circular saw, multi-tool and LED worklight. It also runs on the RYOBI ONE+ 18V battery, which more than 125 ONE+ tools share.

That shared battery is the main reason this kit is on the list. The maker states that all of those ONE+ tools work with any RYOBI ONE+ 18V battery. If you later add a tool for a new project, you can often buy it as a bare tool and run it on the batteries you already own.

The kit comes with a 4.0 Ah battery, a 1.5 Ah battery, a charger and a bag. The 4.0 Ah pack is the one to put on the circular saw or reciprocating saw. The smaller 1.5 Ah pack is lighter and suits the drill or the worklight. With two batteries, one can charge while you work with the other.

Pros

  • Two saws and a multi-tool join the drill and driver, so it covers cutting as well as fastening

  • One 18V battery platform with over 125 tools to grow into

  • Buyers say it is good value next to pricier professional brands

  • Buyers find the tools light and easy to carry for small jobs

Cons

  • Some buyers report batteries that die quickly, even within the first month

  • Some buyers say the tools wear out or break too soon

  • The 1.5 Ah battery runs down sooner on saw work, so long cuts mean more swaps

If you only need to drill and drive screws in tight spots, the DEWALT DCK240C2 is the simpler pick.

Check price on Amazon

How do you pick the right combo kit and find a good deal

Start with your project list, then buy the kit whose tools match it. If your plans are hanging shelves, assembling furniture and putting up curtain rods, a drill and impact driver covers them. If you’re opening walls, cutting framing or trimming flooring, you need saws, and a kit that includes them costs less than buying each tool later.

For example, the CRAFTSMAN CMCK700D2 adds a reciprocating saw, a circular saw, an oscillating tool, a grinder and a task light to the drill and driver. That’s useful for a remodel. For someone who mostly drives screws, those extra tools sit in the closet.

Choose a battery you can build on

The battery platform matters more than the tool count, because every tool you add later should run on the batteries you already own. RYOBI says over 125 ONE+ tools work with any RYOBI ONE+ 18V battery. Once you own those batteries, a later tool like a sander or leaf blower can be a bare tool with no battery or charger in the box, which keeps the cost down. CRAFTSMAN V20 tools also share one cordless system.

Get two batteries when you can

With two batteries, one charges while you work off the other. The DEWALT DCK1021D2 includes two batteries. That keeps a long cutting session going without a break to recharge.

Compare prices across stores

Home centers and factory outlets both discount combo kits. Home Depot lists a marked-down Milwaukee kit [1]. Direct Tools Factory Outlets lists kits with percentage-off final prices [2]. Factory Authorized Outlet also sells combo kits [3]. Look up the same model number at each store before you buy, because the discounts change.

Which kit to buy first

The DEWALT DCK240C2 is the first pick for most people: start with a drill and an impact driver, and add saws when a project calls for them. It covers the drilling and driving that fill most weekends, from hanging shelves to building a deck box. The pair runs on the 20V MAX system and comes with two batteries, a charger and a contractor bag, so you have a spare battery from day one.

Before you compare tool counts, pick your battery platform. Every tool you buy later has to run on those batteries. With RYOBI ONE+, for example, more than 125 tools work with any RYOBI ONE+ 18V battery. Choose the platform first, then buy the kit that fits your next project.

Sources

  1. Power Tool Combo Kits

  2. Power Tool Combo Kits | Collection

  3. Power Combo Kits