SawHaul listings identify Polaris Ranger and General models as compatible, but that does not confirm fit on every year or configuration. Before you buy, match your exact model and bed mounting interface to the carrier or kit listing. [1][2] For more detail, see . SawHaul Polaris Chainsaw Carrier: Features and Installation.
The product descriptions name the Ranger and General, while another listing describes a separate kit for mounting on a Polaris Ranger or General UTV bed. [3][1] That distinction matters if you are comparing a carrier with a vehicle-specific bed kit: a model name alone may not tell you which mounting setup you need. The listings provided do not give a year-by-year fit chart, so use them as a starting point rather than a guarantee for your particular machine.
Check the mounting interface as well as the model name. One SawHaul mount is compatible with Polaris Lock & Ride, and it is made for Polaris Rangers, Generals and Can-Am Defenders.[2] For example, if you have a General, confirm that your bed has the interface required by the kit you are considering; if you have a Ranger, verify the same details instead of relying only on the Ranger name. These are checks to make before purchase, not a claim that every trim or bed uses the same mount.
What to verify before ordering
Exact model: Compare the full model name shown on your machine or owner information with the models named in the listing. SawHaul names the Polaris Ranger and Polaris General as the models its carrier is designed for.[1]
Mounting interface: Check whether the product calls for Polaris Lock & Ride, and compare that with your bed’s mounting points. The universal-kit listing names Lock & Ride compatibility. [2]
Which product you are buying: Distinguish the carrier listing from the separate Polaris bed kit described for Ranger and General UTV beds. [3]
If the product page does not name your model year or bed configuration, ask the seller to confirm fit before ordering.
Key takeaways
Ranger and General models are named as compatible in SawHaul listings. [1][2]
A Polaris-specific bed kit is described separately. [3]
Confirm both your exact model and its mounting interface before you buy.
Which Polaris models are listed?
The Polaris Ranger and Polaris General are the models named, so those names are a useful starting point, not a guarantee that the carrier will fit your exact UTV configuration.[1] If you have a Ranger or General, those names are a useful starting point—not a guarantee that the carrier will fit your exact UTV configuration.
Polaris models named in the listings
The GearHaul product listing says the SawHaul is designed for Polaris Ranger and Polaris General models. [1] A separate listing also describes the carrier as compatible with Polaris Rangers and Generals. [2] Those listings support checking the Ranger and General model families first, but they do not provide a model-by-model or year-by-year fitment list. You may also find this useful: . Does the SawHaul Polaris Chainsaw Carrier Protect the Bar and Chain?.
For example, if you own a Ranger, the listing names your model family; it does not tell you whether a particular Ranger trim or year has the mounting points and space you need. The same limit applies if you own a General. Check that your exact Polaris model and year match what the seller lists before you buy.
Don’t mistake the Can-Am listing for a Polaris model
The product information also names the Can-Am Defender, which is a separate make and not a Polaris model. [1] [2] Because the Defender is a Can-Am, its listing says nothing about other Polaris models, such as one outside the Ranger or General families.
The second listing mentions Polaris Lock & Ride and Can-Am LinQ systems. [2] That detail may help you identify the mounting system discussed in the listing, but it does not add other Polaris model names or confirm fitment across all years. [2] Check your machine’s mounting setup rather than assuming that a shared brand or model family is enough.
What to check before you buy
Start with the model name and year shown for your UTV, then compare them with the product seller’s current fitment information. The listings provided here do not identify specific years, trims, or every mounting configuration, so ask the seller to confirm your exact machine if those details are not clearly listed. [1] [2]
For instance, if your machine is a Polaris Ranger or General, tell the seller the exact model and year and ask whether the carrier’s mounting arrangement matches it. If you have a different Polaris model, ask the seller directly whether the carrier will fit before you order. A direct check can help you avoid ordering based only on a broad family name.
Does your UTV have the right mounting system?
Check the mounting system on your Polaris before choosing a SawHaul carrier: compatibility depends on the mount and any vehicle-specific hardware, not just the model name. One SawHaul listing says its mount works with Polaris Lock & Ride systems and is compatible with Polaris Rangers and Generals.[2] A separate $130 kit is meant for mounting on a Polaris Ranger or General UTV bed.[3] For the next step, see What Chainsaw Size Fits a SawHaul Carrier?
Match the mount to your bed
Start by checking whether your UTV has the Lock & Ride system and whether the carrier listing names your vehicle and mounting setup. The listing’s compatibility statement is useful, but it does not identify every Polaris model or bed configuration.[2] If your machine is not clearly named, ask the seller to confirm the fit for your exact model and bed before ordering.
For example, if you have a Ranger, compare the carrier’s stated mounting system with the setup on your bed; don’t rely on “Ranger” alone. A separate $130 kit is meant for mounting on a Polaris Ranger or General UTV bed.[3] Treat that description as a reason to verify the details, not as proof that every Ranger or General will fit.
Check what the kit includes
Do not assume that a carrier described as universal comes with the vehicle-specific parts you need. The $130 Polaris Ranger or General bed kit includes everything you need except two Lock & Ride parts, so confirm what else you must supply.[3] Confirm the complete parts list with the seller before you buy, especially if you already own a carrier and are shopping only for a mount.
When you contact the seller, give them your Polaris model, bed setup, and the name of the mounting system you see on the vehicle. Ask whether the carrier itself, the bed kit, or both are required, and have them confirm which hardware is included. That check can prevent you from receiving a carrier that fits the saw but lacks the mount needed for your UTV.
The sources support compatibility with Polaris Lock & Ride systems and mention a Ranger or General bed kit, but they do not establish fit for every Polaris model.[3][2] If the exact model and bed setup are not confirmed in the listing, get written confirmation before ordering.
When might the fit depend on your setup?
Fit depends on your Polaris model and how you plan to mount the SawHaul, so confirm your model year, trim and bed configuration with the seller. A listing names Polaris Rangers and Generals and says the mount works with Polaris Lock & Ride, but it does not identify specific versions or dimensions. [2]
Check your mounting points first
Before choosing a carrier, compare the mount described for the kit with the attachment points on your machine. For example, if your Polaris has Lock & Ride attachment points, the source says this mount is compatible with that system; it does not establish that every Ranger or General has the same setup. [2]
A separate $130 kit is meant for mounting on a Polaris Ranger or General UTV bed.[3] If you have a different Polaris model, or a bed that has been modified, don’t assume the Ranger/General bed kit will fit just because the brand matches.
When you may need another attachment method
A nonstandard mounting arrangement may call for a different attachment method. SawHaul can be mounted by many methods, which makes it versatile, but check that your particular Polaris setup works with the mount you choose.
For instance, a custom rack, an altered bed, or mounting points that don’t match the named system could change what hardware you need. Those are examples of setups to verify—not configurations the sources say are supported. Check the carrier’s mounting requirements against your actual machine before buying or drilling, and ask the seller or manufacturer to confirm compatibility if the model or attachment system is not listed.
What to confirm before ordering
Have your exact model name, model year, trim, and bed or mounting-system details ready when you ask.
If you can’t confirm a matching attachment point, treat fit as unverified rather than assuming that a general compatibility statement applies. This is especially useful when comparing a stock bed with a replacement or modified one: the sources support checking the mounting arrangement, not a blanket promise for every Polaris model. [4][2]
What should you check before ordering?
Before ordering, match your Polaris UTV’s exact model and bed setup to the SawHaul kit, then confirm fit if the listing does not name your configuration. Match your Polaris UTV’s exact model and bed setup to the SawHaul kit, and ask the seller to confirm fit if your configuration is not named.
Write down your UTV’s model, year, and bed configuration. Use the model name shown on the vehicle or its paperwork, and note details that could affect mounting, such as the bed layout or installed accessories. For example, record “Ranger,” the year, and whether the bed has any add-ons rather than just “Polaris,” so the seller can give you a useful answer.
A separate $130 kit is meant for mounting on a Polaris Ranger or General UTV bed.[3] One SawHaul mount is compatible with Polaris Lock & Ride, and it is made for Polaris Rangers, Generals and Can-Am Defenders.[2] Look at the bed and your vehicle information to identify the mounting system; do not assume that a Polaris badge alone confirms the right attachment points. If you cannot identify them, ask the seller what to inspect before placing an order.
Compare the hardware with the kit description. A separate $130 kit is meant for mounting on a Polaris Ranger or General UTV bed.[3] Check the current kit contents and make sure you understand what you must supply separately. The product listing also names Polaris Ranger and General models, but that broad compatibility statement does not confirm every bed configuration.[1]
Ask the seller to confirm your exact setup if it is not named. Send the model name, year, bed configuration, and a clear photo of the mounting area. Ask whether the listed kit fits those details and whether any Lock & Ride parts are needed. This matters most if your model is not named or your bed has been modified, since the seller can check your exact configuration.
Keep the seller’s reply with your order details. If the answer is uncertain, wait to order until you have a clear confirmation rather than relying on a general “fits Polaris” description.
The bottom line
The listings identify Polaris Ranger and General models as the Polaris families supported, but you should match the kit to your bed’s mounting system before buying. [3] [1] [2] The key detail is whether your bed uses Polaris Lock & Ride, because the mount is compatible with that system.[2]
For example, if you have a Ranger or General with a Lock & Ride bed, check that the specific carrier kit you plan to order is the version intended for that mounting system. [3] [2] A model-family match by itself does not confirm every year, trim, or bed configuration, so verify those details with the seller or product listing if they are not clearly stated. [3] [1] [2]
SawHaul names the Polaris Ranger and Polaris General as the models its carrier is designed for.[1] If your machine is a different Polaris family, or you are unsure which bed system it has, do not assume the carrier will fit based only on the brand name. [3] [1] [2]
Before ordering, identify your exact model and bed mounting system, then confirm that the kit listing explicitly supports both. [3] [1] [2] If the fit details are missing or unclear, ask the seller to verify your setup rather than relying on a broad compatibility label. [1] [2]