Who Makes the Best Track Saw? Festool, Mafell and Makita Compared

Festool and Mafell top most shop tests, and Makita is a strong cordless pick and a good corded value. Here is how the brands compare for cutting sheet goods.

A man in safety glasses cuts a plywood sheet on sawhorses with a track saw on a guide rail inside an open garage workshop.
In this article

Festool and Mafell make the best track saws for cut quality, and Makita is the strongest pick for most DIYers on a budget. Which one suits you depends on how often you cut sheet goods and which battery platform you already own.

The Festool TS 55 FEQ-Plus-FS earned Wood Magazine’s Top Tool award in its shop test of track saws [1]. In a separate comparison of cordless models, the Mafell came out as the best cordless track saw [2]. Makita’s 40V saw and its corded model both ranked near the top in a 15-saw roundup, which makes them a practical buy if you break down plywood a few times a year [3].

Below, you’ll see why the premium brands keep winning tests, when Makita is the smarter buy, and how to match a brand to your projects.

Why Festool and Mafell keep winning tests

Festool and Mafell keep coming out on top because their saws feel refined in use and hold up in head-to-head testing against every major brand. The catch is price, so they make the most sense if you cut sheet goods often.

Festool: controls and smoothness

The Festool TS 55 FEQ-Plus-FS has best-in-class controls and operating smoothness [1]. For you, that means depth and bevel adjustments that are easy to set and a saw that glides along the track instead of fighting you halfway through an 8-foot rip.

Festool also holds up when the field is crowded. In a test of six track saws from DeWalt, Festool, Makita, Grizzly, Mafell and Triton, Festool won by a nose [4]. That narrow margin tells you the competition is close, but Festool still edged out saws that cost less.

Mafell: strongest among cordless saws

In a comparison of cordless track saws, the Mafell excelled in almost every category [2]. That broad strength matters if you want to work without a cord and still expect clean, consistent cuts in plywood and melamine.

Who should pay for them

Both brands cost more than value picks, so they pay off with steady use. If you break down full sheets every week for cabinets, built-ins or shop furniture, the smoother controls save time on every cut. If you trim one sheet of plywood a year, the extra money buys refinement you will rarely use.

A carpenter guides a track saw along its rail across an oak panel, leaving a clean, splinter-free cut edge.

Is Makita a better buy for most people?

For most DIYers, yes: Makita gives you strong cut quality without the premium price of the top European brands. Makita’s 40V model is arguably the best cordless track saw overall, with power and precision that hold up against pricier saws. [3] That makes it a good fit if you break down plywood for cabinets or shelving and want to work away from an outlet. For a closer look, read Best Band Saw for Woodworking: 5 Picks From Benchtop to 14-Inch.

If you don’t need cordless, the corded Makita is rated the best corded value for the money. [3] A corded saw makes sense when you cut in a garage or shop with power nearby and would rather spend your budget on longer tracks than on batteries.

Other cordless brands worth a look

Makita isn’t your only solid cordless choice. Bosch and Metabo HPT were among the highest-scoring cordless track saws in a head-to-head comparison. [2] Either is a reasonable pick if one of those brands already fills your tool wall.

Let your batteries decide

The smartest buy is often the saw that runs on the batteries you already own. Say you have a drawer full of Makita 40V packs from a drill and a circular saw: the bare-tool Makita saves you the cost of a new charger and batteries. The same logic applies if you’re already invested in Bosch or Metabo HPT. Sticking with one platform also means fewer chargers to keep track of and spare batteries you can swap between tools.

A cordless track saw with its battery pack attached rests on a guide rail atop a cluttered garage workbench.

How do you pick the right brand for your projects?

Match the saw to how often you cut. If you break down a few sheets of plywood a year for shelves or cabinets, a value-priced corded or cordless model does the job. If the saw runs daily in a shop or on a jobsite, a premium brand earns its higher price through smoother operation and better controls over thousands of cuts.

Occasional sheet-goods work

For weekend projects, the Makita corded saw is rated the best corded value for the money [3]. That means you get accurate, straight cuts without paying for features you’d rarely use. If you already own Makita 40V batteries, the cordless version lets you cut in the driveway without running an extension cord.

Daily shop or jobsite use

Frequent users feel the difference in controls and smoothness on long days. The Festool TS 55 FEQ-Plus-FS is praised for best-in-class controls and operating smoothness [1]. That matters when you’re ripping a stack of 4-by-8 sheets for a kitchen job.

Tracks and dust collection

Before you buy, look at which track lengths each brand sells. An 8-foot sheet needs a track long enough to cover the full cut, or two shorter tracks joined together. Some brands’ tracks fit other brands’ saws, which lets you add rails without starting over.

If you cut indoors, give dust collection extra weight. A saw that connects cleanly to a shop vac keeps fine plywood dust off your floors and out of the air in a basement or garage.

The short answer for your shop

Buy the brand that fits how often you cut sheet goods and which batteries already sit on your shelf. If you want the cleanest controls and the smoothest run, Festool and Mafell are the names to beat. Wood Magazine gave the Festool TS 55 FEQ-Plus-FS its Top Tool award for best-in-class controls and operating smoothness [1], and Mafell’s cordless saw excelled in almost every category in a separate comparison [2].

If you want strong cordless power or a corded saw that saves money, look at Makita first. Your next step is to price a saw on your current battery platform, then add the track length your longest panels need.

Sources

  1. Shop Tested TrackSaws

  2. Best Cordless Track Saw Comparison

  3. 15 Best Track Saws Ranked (2025) – The One You Should Buy

  4. Track Saw Review | Tool Test – Woodworker’s Journal